Brochure

MODULAR GAS SENSOR BASE ACCEPTS AG SERIES GAS SENSORS
FEATURES
Modular platform accepts Veris AG Series sensors (sold separately)...
no need to install a new GWN when the sensor life wears out
Three colored LEDs (red, yellow, green)...easy status viewing
Microprocessor controlled...excellent stability
No calibration required...easy maintenance and
worry-free operation
Interface to DDC system or direct fan control...easy integration with
existing systems
Interface to control system via 4 to 20 mA with relay, 0 to 5/
0 to 10 Vdc with relay, or relay only options...application exibility
Relay outputs provide low, high, and sensor end-of-life signals for
multi-stage fan actuation and service indication
DESCRIPTION
GWN Series gas platform oers a convenient means for sensing gases in
the environment. The GWN is mounted to any single-gang electrical box
and wired to the building controller. Then, a single AGxx gas sensor (sold
separately) is installed in the GWN. With this design, there is no need for a
costly new installation when a sensor reaches the end of its life. The GWN
platform remains installed, and the installer simply opens the GWN housing
to replace the modular sensor inside, reducing labor costs and downtime.
AG Series sensors can be swapped in the GWN platform at any time with
minimal eort. The GWN platform converts the signal from the AG sensor
into an analog or relay signal compatible with building control systems.
Input Power Class 2; 15 to 30 Vdc/24 Vac ±20%, 50/60 Hz
Relay Ratings 1A/30 Vac/dc, normally open
Operating Temperature Range -20 to 50 °C (-4 to 122 °F)
Operating Humidity Range 0 to 90% RH non-condensing
Terminal Block Wire Size 30 to 12 AWG
Terminal Block Torque 0.5 to 0.6 N-m (0.37 to 0.44 in-lbf)
Protection Class IP20
Limited Warranty 5 years*
GWN
AG01 CO Sensor AG01E CO Sensor
AG02 NO
2
Sensor
SENSOR TYPE
Electrochemical Electrochemical Electrochemical
MEASUREMENT RANGE
0 to 300 ppm 0 to 500 ppm 0 to 15 ppm
ACCURACY
±3% of range ±5% of range ±5% of range at 25 °C
ANALOG OUTPUT SCALING
0 to 200 ppm 0to 200 ppm 0 to 15 ppm
RESOLUTION
1 ppm 1 ppm 0.1 ppm
SENSOR WARRANTY
2 years from manufacture date 1 year from manufacture date 2 years from manufacture date
LOW SETPOINT VALUE
25 or 35 ppm (switch selectable) 25 or 35 ppm (switch selectable) 1 ppm (xed)
HIGH SETPOINT VALUE
180 ppm (xed) 180 ppm (xed) 3 ppm (xed)
OPERATING TEMPERATURE
RANGE
-20 to 50 °C (-4 to 122 °F) -20 to 50 °C (-4 to 122 °F) -20 to 50 °C (-4 to 122 °F)
OPERATING HUMIDITY RANGE
0 to 90% RH non-condensing 0 to 90% RH non-condensing 0 to 90% RH non-condensing
APPLICATIONS
Controlling parking garage ventilation
Air quality compliance in commercial buildings and factories
Vehicle bays (ambulance/re/taxi stations)
Mechanical rooms
Sally ports
SPECIFICATIONS
The GWN operates only when an AG Series gas sensor is installed (sold separately).
Accuracy, sensitivity, setpoints, and measurement range are dependant on the AG Series
sensor connected to the GWN platform. See the AG Series sensor installation guide for
details.
* The AG Series gas sensors are warranted for two years from the date of manufacture. The
AG Series sensors are not included in the five-year GWN warranty.
Air Quality / Gas Detection |
For more information on how Veris products can help optimize your systems:
Call: Toll-free 800.354.8556 | Intl. +1 503. 598.4564 Email: sales@veris.com | intl@veris.com
TM
GWN Series
Gas Platform for Gas Sensors
HQ0004936.F 0116

Summary of content (2 pages)