User's Manual
Table Of Contents
- VX 685/VX 690
- Contents
- Preface
- Terminal Overview
- Setup
- Selecting a Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Examining the Connection Port
- Installing/ Replacing Paper Roll
- Installing/ Replacing SIM Card
- Installing/ Replacing MSAM Cards
- Installing/ Replacing the Micro SD Card
- Connecting Optional Devices
- Battery Features
- Connecting the Terminal to Power Source
- Base Stations
- Powering Up the Base
- 3G, GPRS, and GPS Support
- Bluetooth Support
- Performing a Wireless Transaction
- Using the Smart Card Reader
- Using the Magnetic Card Reader
- Performing a Contactless Smart Card Transaction
- Specifications
- Maintenance and Cleaning
- Service and Support
- Troubleshooting Guidelines
- Contact VeriFone
SETUP
Installing/Replacing SIM Card
VX 685/VX 690 I
NSTALLATION GUIDE 17
V
E
R
I
F
O
N
E
C
O
N
F
I
D
E
N
T
IA
L
R
E
V
I
S
I
O
N
A
.
3
6 Drop the paper roll into the printer tray.
Figure 4 Installing Paper Roll Cover
Installing/
Replacing SIM
Card
VX 685 has a single SIM slot that enables communication to the network provider.
VX 690 supports dual SIM. SIM slot 1 is preferred for single SIM use. When dual
SIM is employed, it is ideal to use SIM cards from two different network providers.
This allows the terminal to switch SIMs when it detects poor signal or no network.
To Install/Replace a
SIM Card
1 Turn off the terminal.
2 Place the terminal upside down on a soft, clean surface to protect the lens
from scratches.
3 Lift the battery pack to expose the SIM slots.
CAUTION
To prevent damaging the print roller, always gently press down on the paper roll
cover to close it.
NOTE
Position the card’s gold contacts facing away from you, toward the unit. The card
slot in the terminal has a set of contacts. The SIM card has a notch on one corner
to ensure that it fits into the connector base in only one way.