Installation Guide
Table Of Contents
- Vx670
- Contents
- Preface
- Terminal Overview
- Terminal Setup
- Selecting Terminal Location
- Unpacking the Shipping Carton
- Examining Terminal Features
- Examining the Handy-Link Connector
- Establishing Telephone Line Connections
- Installing the Paper Roll
- Installing/ Replacing MSAM Cards
- Installing/ Replacing SIM Card (GSM/GPRS Models)
- Connecting the Terminal Power Pack
- Using the Smart Battery
- Vx670 Battery Behavior (No Power Cord)
- Installing the Smart Battery
- Charging the Smart Battery
- Using the Vx670 Base Station
- Placing the Vx670 Terminal Onto the Base Station
- Attaching the USB Dongles to the Base Station
- Charging the Spare Battery on the Base Station
- Conducting Wireless Transactions
- Conducting Smart Card Transactions
- Using the Magnetic Card Reader
- Specifications
- Maintenance
- VeriFone Service and Support
- Troubleshooting Guidelines
- Terminal Does Not Start
- Terminal Display Does not Show Correct/Readable Info
- Smart Battery Will Not Charge
- Spare Battery in Base Station Will Not Charge
- Blank Display
- Terminal Does Not Dial Out
- Printer Does Not Print
- Printer Paper Jam
- Peripheral Device Does Not Work
- Keypad Does Not Respond
- Transactions Fail To Process
- Index
- Contact VeriFone
V
X
670 INSTALLATION GUIDE 37
CHAPTER 3
Specifications
This chapter discusses power requirements, dimensions, and other specifications
of the V
x
670 terminal.
Power
V
x
670 terminal: 9 V DC; 4.0 A
DC Power Pack
UL, ITE listed, Class 2 power supply:
a Input rated: 100 - 240V AC, 50/60 Hz
b Output rated: 8.6 - 9.4V DC 4.0 A
Barrel connector polarity:
Temperature
• Operating temperature: 0
°
to 40
°
C (32
°
to 104
°
F)
• Storage temperature: -30
°
to + 60
°
C (-22
°
to 140
°
F)
• Relative humidity: 5% to 90%; no condensation
V
x
670 External
Dimensions
For V
x
670 Terminals:
• Length: 169 mm (6.7 in)
• Width: 81 mm (3.2 in)
• Depth: 60 mm (2.4 in)