User's Manual
Table Of Contents
- Verifone Carbon Installation Guide
- Contents
- Preface
- Device Overview
- Setup
- Selecting Unit Location
- Unpacking the Shipping Carton
- Periodic Inspection
- Examining the Unit’s Features
- Establishing Communication
- Loading a Paper Roll in the Printer
- Installing or Replacing MSAM Cards
- Connecting Optional Devices
- Connecting the Terminal Power Pack
- Using the Smart Card Reader
- Using the Magnetic Card Reader
- Using the Contactless Reader
- Specifications
- Maintenance and Cleaning
- Service and Support
- Troubleshooting Guidelines
- Port Pinouts
- Appendix
- Contact Verifone
SPECIFICATIONS
Technical Specifications
V
ERIFONE CARBON INSTALLATION GUIDE 31
R
E
VI
SIO
N
A
.
2
Temperature
• Operating Environment: 0°C to +50 °C (32 °F to 122 °F)
• Non-Operating Environment: -20 °C to +70°C (- 4 °F to 158 °F)
• Relative humidity: 5% to 90% RH non-condensing
Communication
• WiFi
• Ethernet
• Speed 10 Base-T /100 Base-TX
• Compliant with IEEE802.3 LAN networks.
• Dial modem
• V.92 standard supported, line speeds from 2400 Kbps to 56 Kbps.
• USB
• Four USB2.0 high speed slots
• Supports 5 V, 500 mA to external USB device
• One micro USB type AB host port (OS downloads)
• Multi-Communication port
• Supports the MOD 10 RS-232 + USB/Mini-USB Multi-Communication
dongle.
• Optional 3G or 4G
Printer Stand
Unit Power Requirements
• Input power rating: 24 V DC, 3.75 A
• External universal-input 18 W power supply, compliant with Energy Efficiency.
Temperature
• Operating Environment: 0°C to +50 °C (32 °F to 122 °F)
• Non-Operating Environment: -20 °C to +70°C (- 4 °F to 158 °F)
• Relative humidity: 5% to 90% RH non-condensing
Thermal Printer
• Support 30 LPS for first 30 sec, and then printing speed will slow down to
meet 18 W power budget.
• Supports 57 mm wide x 40 mm diameter paper roll
• Out-of-Paper Sensor.