Installation Guide

2
WARNING:
• Improper installation of this product can result in personal injury. Always wear safety goggles when
cutting, drilling and assembling the product.
• Incorrect installation may cause harm to the product or individual.
• Not pool code approved.
NOTICE:
• DO NOT attempt to assemble the kit if parts are missing or damaged.
• DO NOT return the product to the store, for assistance or replacement parts call: 1-800-336-2383.
TOOLS NEEDED:BEFORE YOU BEGIN:
Post Kit
Components:
Angle Brackets sold separately.
Rail Kit
Components:
Stair Rail Kit
Components:
Description
Post, with Mounted Plate
Pyramid Post Top
2 Piece Base Trim
Secondary Mounting Plate
Description
Rail Cap
Top Rail
Bottom Rail
Locking Strips
Rail Bracket Kit
Square Baluster Kit
Hardware
Support Block
Description
Rail Cap
Top Rail
Bottom Rail
Locking Strips
Stair Bracket Kit
Square Baluster Kit
Hardware
Safety Glasses
Pencil
Level
Chalk Line
7
⁄16" &
1
⁄8" Drill Bits
Drill
Hacksaw or Chopsaw*
Tape Measure
Scissors or Utility Knife
Tape
Rubber Mallet
Clamps
Fine-tooth Carbide Blade*
Deck Board
(For Stair Rail Spacing)
2"x8" Wooden Blocks
(For Post Support)
Shims (Steel Washers)
Clear, Weatherproof Silicone
Caulk (For Glass Slats)
FASTENERS NEEDED:
Depending on Installation Method (Sold Separately)
3
⁄8" Diameter Galvanized Bolts with
Nuts (For Deck/Wood)
3
⁄8" Masonry Anchors (For Concrete)
#10x3
1
⁄2 " Deck Screws (For Deck/Wood)
It is the responsibility of the installer to
meet and/or exceed all code and safety
requirements and to obtain all required
building code permits.
The deck and railing installer should
determine and implement appropriate
installation techniques for each installation.
*If using a chopsaw, use a ne-tooth carbide blade.
To obtain and review a copy of the warranty please go to: BarretteOutdoorLiving.com/warranty. You
can also contact 1-800-336-2383 or write to Barrette Outdoor Living, 7830 Freeway Circle, Middleburg
Heights, Ohio 44130 to obtain a copy of the warranty.