Installation Guide

a. Pre-drill the top rail at the bottom stair post using the

bracket holes as a guide (Fig. 13).

b. Drive two (2) 1

⁄8

" painted pan head screws up

through the holes locking the bracket, panel and top

rail together. Once the top rail is secured, tighten all

four (4) of the hinge bolts to lock stair panels in place.

Install pyramid post top onto each post (Fig. 14).

NOTE:

A rubber mallet may be needed for a proper t.

Pre-drillPre-drill

Fig. 13

Fig. 14

Pyramid TopPyramid Top

PostPost

NOTE:

Angle rail installation uses a combination of

features used in both the rail and stair

applications. This installation will use the same

bracket base of the stair brackets and similar

components, while using the preset layout of the

installation template for quick and easy installation.

Angle rail brackets must be purchased separately.

Angle rail mounting varies greatly on each

installation.

ANGLE RAIL INSTALLATION