Back Venting Guide
Back Vent Applications (Page 1 of 4)
Hood Model/Hood Style
Back Vent
Diagram
K250
(3-1/4” x 10”)
B100
(6” Round)
B200
(8” Round)
B300
(8” Round & 6” Round)
B400
(Two 8” Round)
K-Series Under Cabinet Hood and Liner Insert A Standard n/a n/a n/a n/a
6” Under Cabinet (Excluding K-Series) B n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561
9” Under Cabinet B n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561
CWEH6-K B VP559 n/a n/a n/a n/a
CWEH9 B n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561
CWLH9 B n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561
GTH-K D VP559 n/a n/a n/a n/a
XLH12 with 10” x 10” Duct Cover D n/a n/a VP515 or VP561 n/a n/a
ZTH D n/a n/a VP515 or VP561 VP513 & VP515 or VP561 n/a
18” Tall Wall Mount B n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561
18” Tall Wall Mount - Special Deck at 9” C n/a VP513 VP561* VP513 & VP561* 2-VP561*
14” Tall Eurostyle Wall Mount (PD, SLD) D n/a VP513 n/a n/a n/a
18” Tall Eurostyle Wall Mount (EP, NEP, SEP) D n/a n/a VP561* n/a n/a
18” Tall Eurostyle Wall Mount (EPT, NEPT, SEPT) C n/a n/a n/a VP513 & VP515 or VP561 n/a
30” Tall Wall Mount C n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561
CWH B n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561
TILT-Out (TLH) C n/a VP513 VP561* n/a n/a
JCH/A1 Designer Series D n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561
JCH/B1 Designer Series D n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561
JCH/C1 Designer Series C n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561
JCH/C2 Designer Series C n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561
JDH/C1 Designer Series C n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561
JDH/C2 Designer Series C n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561
JDH/D1 Designer Series C n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561
12” Tall Magic Lung Wall Mount Liner Insert B n/a VP513 VP515 or VP561 VP513 & VP515 or VP561 2-VP515 or 2-VP561
*Can also use VP515(s) with duct cover (elbow(s) will extend above the top of the hood.
Note: This chart outlines the most common applications. Contact Vent-A-Hood or your distributor for more information.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE (Rev. 04/11a)