Submittal Sheet

Venstar Duct Temperature Sensor
ACC0402
STANDARD FEATURES:
• This sensor is made with plenum-rated cable and designed to be placed in the return duct.
• A rubber grommet is included to protect cable from sheet metal edges
• Two wire nuts are provided for wire connections.
• Sensor can be used to measure return, indoor or outdoor air temperatures.
• Sensor can be wired to a T1900 or T2900 when remote averaging is needed.
• If used as a return duct sensor it can control to, monitor or average with a T1900 or T2900 thermostat.
• If used outdoors, the sensor can be used to provide outside temperature information (which is not used
to control heating or cooling).
• Acceptable Wire Types: CAT5, CAT5e, or CAT6 network communication cable, unshielded with 4
twisted pairs of 24 gage solid wire
• Measurement range is -20F ~ 120F.
• Maximum distance between sensor and thermostat is 200ft
MODEL: ACC0402 QUANTITY: DATE:
JOB NAME:
LOCATION:
BUYER: BUYER P.O.#:
ENGINEER: