Specifications

70 Chapter 7: Output Section

VeniceF

Operator Manual

Recording

The two out (right and left) connectors are recording outputs. They are routed via the

stereo bus output and operate at a nominal -10dB. These outputs provide a direct

output from the console that is post-everything, including mute.

Local monitor and phones

There are two local monitor outputs on the rear panel for providing a signal for monitor

speakers.

Local monitor outputs on the rear panel

A local monitor section on the control surface lets you connect headphones for local

monitoring and adjust their signal level, and also the signal level of the local monitor

outputs.

Local monitor section on the control surface and the position of the addition

headphones socket on the front panel of the console

2 MUTE switch and red LED The MUTE switch mutes the input signal.

The LED illuminates to show when the mute is on.

3 SOLO switch and yellow LED The SOLO switch routes the input signal

to the mono PFL bus and stereo AFL buses. The solo LED illuminates to

show when solo is on.

Item Description

1 phones control knob Adjusts the headphones level, which is

continuously variable from

4 (infinity/off) to +10dB.

2 MUTE switch and red LED The MUTE switch mutes the headphone

signal. The LED is illuminated when the switch is on.

Item Description