Installation Guide

8 VELUX
®
VELUX
®
9
b
a
+
+
KEY PRG
LED
+
+
L R
-
-
L R
L R
LED
Operation
Keys for operating the product
a
OPEN/UP or CLOSE/DOWN
Short key pressure: Product will travel to maximum top or bottom
position.
Long key pressure: Product will travel only until the key is released.
Note: If several electrical products are connected to a control unit
KLC 500, only one of the products (random) can be operated in this way.
Stop key
b
Product stops.
Batteries
Insert batteries as shown.
Set-up of control keypad KLI 110
On the back, the control keypad is equipped with two buttons L and R
and a light-emitting diode LED to be used during set-up.
Do not fix the control keypad to the wall until set-up has been completed
and it has been verified that the products can be operated from the
proposed position.
Please refer to pages 10-19 to set-up KLI 110 to operate products with
the controls below.
To operate a solar powered blind
Pages 10-11
To operate products already registered in
control pad KLR 200
Pages 12-13
To operate products already registered in
remote control KLR 100
Pages 14-15
To operate products connected to control
unit KLC 500
Pages 16-17
To operate products already operated by an
existing control keypad KLI 110
Pages 18-19