60" NATIVITY SCENE Part Description Illustration Qty A Holy mother 1 B Arm 1` C Upper body of holy father 1 D Lower body of holy father 1 E Arm 1 F Staff 1
G Holy son 1 H Stander 1 I Star 1 J Upper arch 1 K Lower arch 2 L Stander 2 M Plastic Ties N Ground Stake
MAKE SURE TO FOLLOW THE STEPS BELOW FOR A SUCCESSFUL & EASY ASSEMBLY TIP: To ensure the final unit is secure and sturdy it is highly recommended to secure each component with the zip ties provided after connecting each component together in the steps. TO ASSEMBLE 1. Remove all components from the box and lay flat on the floor. NOTE: Some parts are connected by a string of lights and should NOT be separated.
4. Insert the prongs on the Stander (L) into the corresponding rings of the Lower arch(K). (see Fig.2) 5. Insert the prongs on the Upper body of holy father(C) into the corresponding rings of the Lower body of holy father(D). (see Fig.2) 6. Insert the prong on the Arm (E) into the corresponding rings of the Upper body of holy father(C). (see Fig.2) 7. Insert the prong on the Lower body of holy father(D) into the corresponding ring of the Lower arch(K). (see Fig.2) Fig.
8. Insert the prong on the Arm (B) into the corresponding rings of the holy mother(A). (see Fig.3) Fig.
9. Insert the prongs on the Staff (F) into the corresponding rings of the Upper body of holy father(C).(see Fig.4) Fig.
10. Connect the Stander (H) and the Holy son (G) by inserting the metal hooks into the corresponding metal ring (STEP.1), insert the metal posts into the corresponding metal cylinders. (STEP.2).(see Fig.5) Fig.
11. VERY IMPORTANT: Secure the installing points with plastic ties(I) and secure the base to the soft ground by fully inserting Ground stakes(J) into the ground.
12. Connect the plug to the extension cord and plug the light set into a standard 120-volt AC electrical outlet.