Manual

28
6 Set up with the display and adjustment module PLICSCOM
VEGABAR 54 • 4 … 20 mA
36725-EN-130321
The display and adjustment module enables the adjustment without
llingorpressure.Thankstothis,youcancarryoutyoursettings
already in the workshop without the instrument having to be installed.
The actual measured value is displayed in addition to the menu items
forzero/spanadjustment.
VEGABAR54ispresettoapplication"Levelmeasurement".Proceed
asfollowswhenswitchingovertoapplication"Processpressure
measurement":
1. Push the [OK] button in the measured value display, the menu
overview is displayed.
2. Selectthemenu"Service"with[->]andconrmwith[OK].
Basic adjustment
Display
Diagnostics
▶
Service
Info
3. Selectthemenuitem"Application"with[->] and edit with [OK].
Warning:
Notethewarning:"Output can change".
4. Select with [->]"OK"andconrmwith[OK].
5. Select"Process pressure"fromthelistandconrmwith[OK].
In this menu item you select the adjustment unit as well as the unit for
the temperature indication in the display.
To select the adjustment unit (in the example switching over from bar
to mbar), proceed as follows:
3)
1. Push the [OK] button in the measured value display, the menu
overview is displayed.
▶
Basic adjustment
Display
Diagnostics
Service
Info
2. Conrmthemenu"Basic adjustment"with[OK], the menu item
"Unit"willbedisplayed.
Unit
Unitofmeasurement
bar
▼
Temperature unit
°C
▼
3. Activate the selection with [OK]andselect"Units of measure-
ment with [->].
4. Activate the selection with [OK] and select the requested unit with
[->] (in the example mbar).
5. Conrmwith[OK] and move to position correction with [->].
Select application "Pro-
cess pressur
e measure-
ment"
Select unit
3)
Selection options: mbar, bar, psi, Pa, kPa, MPa, inHg, mmHg, inH
2
O,
mmH
2
O.