Troubleshooting Guide

IMPORTANT INFO
❑ At the time of sale the UTV must be registered. This helps validate the warranty!
Please stress to the customer to register the UTV at:
❑ For technical questions or information on the nearest Vector Service
Center visit www.vectorutv.com or please call the toll-free number
below:
866-447-6224
Vector Store Support Line
Or email us at [e-mail]
❑ Keys delivered with the UTV are specific to that UTV.
1. Park the Vector 500 for display and remove the key from the ignition. The key in the
ignition is labeled with the last 4 digits of the VIN number.
2. Remove the plastic bag from the glove box. The plastic bag includes the owner’s manual,
the manufacturer’s states of origin (MSO), additional paper work and an extra key.
3. Place the key from the ignition in this bag and seal it.
4. Partner with management to provide a clear plastic tote in a secure location where
key’s, owner’s manuals can be organized pending sales, similar to riding mower process
5. A replacement key cannot be made if both original keys are lost – replacing the ignition
will be required! If one key goes missing, please immediately have another key cut in
store using a 37R blank.
❑ Before cleaning unit, thoroughly rinse off any dirt or debris with water to avoid
scratching body parts or windshield during cleaning. To clean, use mild soap,
warm water and soft cloth.
www.vectorutv.com/register
UTV
❑ At the time of sale the MSO (manufacturers statement of origin) must
be signed over to the customer purchasing the UTV. The MSO is in the
manual pack. See instructions on the following pages.
(Tote)
(Manual Pack)
(37R Key Blank)
(MSO)