Instruction Manual

HW Installation manual Rev 3.15
VECOS Europe BV, Esp 237, 5633 AD EINDHOVEN, The Netherlands Page 5 of 17
Connecting the OUTPUT:
The output wires of the power supply needs to be connected to the Power Connection Box, Red on the + and Black
on the – of the 4-level connector.
In the empty position of the 6 level connectors, power extension cables can be connected. The 3 white power
connectors can connect directly to HUB’s or a Terminal.
The Power Supplies are delivered with the Power Connection Box (AC13009/0) and needs to be connected onsite. In
case the Power Supplies are mounted in/under/on-top of a metal locker, use self-tapping screws to connect it to
ground.
The Power Connection Box has a limit of 18A, so never use a PSU that can supply more then 18A!