Technical data

502 Keysight InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
25 :SBUS<n> Commands
:SBUS<n>:SPI:SOURce:MOSI
(see page 792)
Command Syntax
:SBUS<n>:SPI:SOURce:MOSI <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital<d>} for the MSO models
<n> ::= 1 to (# analog channels) in NR1 format
<d> ::= 0 to (# digital channels - 1) in NR1 format
The :SBUS<n>:SPI:SOURce:MOSI command sets the source for the SPI serial
MOSI data.
You can also use the equivalent :SBUS<n>:SPI:SOURce:DATA command to set the
MOSI data source.
Query Syntax
:SBUS<n>:SPI:SOURce:MOSI?
The :SBUS<n>:SPI:SOURce:MOSI? query returns the current source for the SPI
serial MOSI data.
Return Format
<source><NL>
See Also • "Introduction to :TRIGger Commands" on page 589
• ":SBUS<n>:SPI:SOURce:MISO" on page 501
• ":SBUS<n>:SPI:SOURce:CLOCk" on page 499
• ":SBUS<n>:SPI:SOURce:FRAMe" on page 500
• ":SBUS<n>:SPI:TRIGger:PATTern:MISO:DATA" on page 503
• ":SBUS<n>:SPI:TRIGger:PATTern:MOSI:DATA" on page 505
• ":SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh" on page 504
• ":SBUS<n>:SPI:TRIGger:PATTern:MOSI:WIDTh" on page 506