Owner's manual

Zoom SHOT WallVIEW SR
ZoomSHOT WallVIEW SR System Document Number 342-0651 Rev B Page 14 of 16
ZoomSHOT Command List (2/2)
Command Set Command Command Packet Comments
CAM_Memory Reset
Set
Recall
8x 01 04 3F 00 0p FF
8x 01 04 3F 01 0p FF
8x 01 04 3F 02 0p FF
p:Memory No(=0-0xF)
CAM_IDWrite 8x 01 04 22 0p 0q 0r 0s FF pqrs:0x0000 – 0xFFFF
IR_Receive On
Off
8x 01 06 08 02 FF
8x 01 06 08 03 FF
CAM_LR_Reverse On
Off
8x 01 04 61 02 FF
8x 01 04 61 03 FF
Mirror (Horizontal) on
Mirror (Horizontal) off
CAM_PictureEffect Color
B&W
8x 01 04 63 00 FF
8x 01 04 63 04 FF
Tally On
Off
8x 01 7E 01 0A 00 02 FF
8x 01 7E 01 0A 00 03 FF
Preset Pan Speed Zoom Speed 81 01 7E 01 0B 00 00 ZZ FF ZZ:Zoom Speed(0-7);
BLK.Enhance No support No support No support
GMA.Enhance Gamma 8x 01 7E 54 00 00 0p 0q FF pq: Gamma (0x00-0x10)
CRM.Enhance Chroma 8x 01 7E 55 00 00 0p 0q FF pq: Chroma (0x00-0x64)
KNE.Enhance Knee No support No Support
DIS.Enhance Digital Image
Stabilizer
8x 01 7E 57 02 FF
8x 01 7E 57 03 FF
On
Off
SNR.Enhance Digital Noise
Reduction
8x 01 7E 58 02 FF
8x 01 7E 58 03 FF
On
Off
AGC.Enhance AGC Mode 8x 01 7E 59 00 FF
8x 01 7E 59 01 FF
8x 01 7E 59 02 FF
8x 01 7E 59 03 FF
8x 01 7E 59 04 FF
Off
Low
Medium
High
Manual
CAM_Shutter Reset
Up
Down
Direct
8x 01 04 0A 00 FF
8x 01 04 0A 02 FF
8x 01 04 0A 03 FF
8x 01 04 4A 00 00 0p 0q FF
pq(0x00-0x23)
CAM_ICR ICR On
ICR Off
8x 01 04 01 02 FF
8x 01 04 01 03 FF
ICR On – Cut filter out B&W
ICR Off – Cut filter in Color
*Zoom and Focus Data:
CAM_Zoom: Range(0x000–0x6B3)
CAM_Focus: Range (0x0000-0xC000) dependent on Zoom Position