CCU IMAGE CONTROLLER* FOR CEILINGVIEW™ HD-18 DOCCAM Part Number: 999-1105-023 Worldwide (Includes North American, Euro and UK Power Cables) Front Panel Rear Panel CeilingVIEW HD-18 DocCAM - Sold Separately *Also compatible with Vaddio HD-18 and HD-20 PTZ cameras using the CeilingVIEW HD HideAway motorized lift system and enclosure. ©2011 Vaddio - All Rights Reserved. CCU Image Controller for CeilingVIEW HD-18 DocCAM - Document 342-0197 Rev.
CCU Image Controller for CeilingVIEW HD-18 DocCAM Inside Front Cover - Blank CCU Image Controller for CeilingVIEW HD-18 DocCAM - Document 342-0197 Rev.
CCU Image Controller for CeilingVIEW HD-18 DocCAM CCU Image Controller for CeilingVIEW HD-18 DocCAM Front Panel View: Rear Panel View: Overview: The CCU Image Controller was designed to provide color/image control to the CeilingVIEW HD-18 DocCAM packages. It is also can be used as an image controller for the HD-18 or HD-20 PTZ cameras used in the CeilingVIEW HD HideAway motorized lift system.
CCU Image Controller for CeilingVIEW HD-18 DocCAM Unpacking: The 999-1105-022 System is Packaged as a Worldwide* Product and Includes: One (1) 998-1105-022 CCU Image Controller for CeilingVIEW HD-18 DocCAM One (1) 12 VDC, 1.
CCU Image Controller for CeilingVIEW HD-18 DocCAM CCU Image Controller Rear Panel Connections (left to right): Power Input: 5.5mm OD x 2.5mm ID, Positive Center 12 VDC, 1.0 Amp, Power Jack Use with Provided 12 VDC, 1.0 Amp Power supply only. RS-232 IN: Control input from Joystick Controller (i.e. Precision Camera Controller, ProductionVIEW HD, etc…), control system or codec. This input provides for camera control other than CCU controls.
CCU Image Controller for CeilingVIEW HD-18 DocCAM System Connectivity Example: Featuring the CeilingVIEW HD-18 DocCAM, Quick-Connect DVI/HDMI SR Interface, CeilingVIEW HD-18 Series CCU Image Controller & ProductionVIEW HD CeilingVIEW HD-18 DocCAM RS-232 Two (2) Cat-5e Cables Up to 100’ (30.
CCU Image Controller for CeilingVIEW HD-18 DocCAM General Specifications: CCU Image Controller P/N: 999-1105-023 Connectors: Power Connector: 5.5mm OD x 2.5mm ID RS-232 IN RJ-45: Accepts RS-232 from ProductionVIEW or other non-daisychain control systems RS-232 OUT RJ-45: Sends/Receives RS-232 to the CeilingVIEW HD-18 DocCAM Tally: 2-Pin Phoenix type spring cage connector 2-Line Blue Back-lit Character Display LCD Display Up to 100’ (30.
CCU Image Controller for CeilingVIEW HD-18 DocCAM Compliance and CE Declaration of Conformity - Vaddio CCU Image Controller FCC Part 15 Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
CCU Image Controller for CeilingVIEW HD-18 DocCAM Warranty Information: (See Vaddio Warranty Policies posted on vaddio.com for complete details): Hardware* Warranty: One year limited warranty on all parts. Vaddio warrants this product against defects in materials and workmanship for a period of one year from the day of purchase from Vaddio. If Vaddio receives notice of such defects during the warranty period, they will, at their option, repair or replace products that prove to be defective.
CCU Image Controller for CeilingVIEW HD-18 DocCAM CCU Image Controller Notes: CCU Image Controller for CeilingVIEW HD-18 DocCAM - Document 342-0197 Rev.
CCU Image Controller for CeilingVIEW HD-18 DocCAM Inside Back Cover - Blank CCU Image Controller for CeilingVIEW HD-18 DocCAM - Document 342-0197 Rev.
CCU Image Controller for CeilingVIEW HD-18 DocCAM 9433 Science Center Drive, Minneapolis, MN 55428 Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464 www.vaddio.com ©2011 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice. Vaddio, CeilingVIEW, ProductionVIEW, Quick-Connect, EZCamera, HSDS and PowerRite are registered trademarks of Vaddio.