Instruction Manual

3
Features

An EX-view HAD™ CCD features 380,000 (NTSC) or
440,000(PAL) effective picture elements and
highsensitivity shooting. The minimum illumination
required is 0.7 lx (1/60 sec. (NTSC), 1/50 sec. (PAL),
ICR OFF). (EVI-D90N/D90P)

A CCD features 380,000 (NTSC) or 440,000 (PAL)
effective picture elements and high-sensitivity
shooting. The minimum illumination required is 0.4
lx (1/60 sec. (NTSC), 1/50 sec. (PAL)). (EVI-D80N/
D80P)

The EVI-D90N/D90P are equipped with a bright
zoom lens with 28× optical zoom and F1.35 aperture.

The EVI-D80N/D80P are equipped with a bright
zoom lens with 18× optical zoom.

A newly-developed Processor provides high
resolution images.

By adopting its wide and dynamic range functions,
you can see the optimised shooting image which
incorporates bright and dark subjects at the same
time. (EVI-D90N/D90P)

3D Low-noise images can be obtained even in low-
light environments using the Noise Reduction
function.

Adopts the industry standard RS-232C interface of
VISCA camera protocol in external communication.
It is possible to operate from long distances by using
both RS-232C and RS-422.

You can install the camera on ceilings due to the
functions of high-speed and wide range pan/tilt
action and vertical image flip.

You can use the infrared remote commander to set
the camera and also to select panning, tilting and
zooming from the setting menu.

You can store up to 6 kinds of camera direction and
camera status into the camera.