User guide

EasyTalk USB Tools
Vaddio EasyTalk USB Solution - Document Number 342-0449 Rev B Page 21 of 48
LCD Monitor Loudspeakers:
This same connection scheme using the Line Output for the connection to the room’s loudspeaker can be used if
desire is for playback to originate from LCD displays using its internal loudspeakers. In this application, the user
should avoid using LCD volume controls for adjusting level during a conference for the same reason described
above.
It is important to note that some LCD displays default the audio input source to the HDMI
connected video source.
For instance when a PC is directly connected to the LCD with an HDMI cable, some LCD displays will by default
use the PC’s soundcard for playback audio and not the EasyUSB Mixer/Amp. If this occurs the EasyMic MicPOD
Echo Cancellation will not function properly.
Diagram: PC USB Conferencing using the Built-in Speakers of the LCD Display
PC with UC Client Software
Supplied
CAT-5e
Cables
EasyUSB
Mixer/Amp
Rear Panel
Uses UAC
(Universal
Audio
Class)
Drivers
USB 2.0
Cable
Audio
Line IN
Line
OUT
Two (2) EasyMic
MicPOD Table Mics
LCD Display Using
Audio Line IN
(for small rooms)
PC
Video