User Manual

WallVIEW HD-USB PRO Camera System
WallVIEW HD-USB PRO Camera System Document Number 342-0467 Rev. E Page 39 of 40
SystemFactory‐Reset
 NAME
system factory-reset - Gets or sets factory reset status
 SYNOPSIS
system factory-reset {get|on|off}
 DESCRIPTION
Method used to get or set the factory reset status
 OPTIONS
get Get the current factory reset status
on Enable factory reset on reboot
off Disable factory reset on reboot
 EXAMPLES
system factory-reset get
factory-reset (software):
off
factory-reset (hardware): [Hardware reset is designated by rear panel dip switches in down position]
off
Returns the factory reset status
----
system factory-reset on
factory-reset (software): on
factory-reset (hardware): off
Enables factory reset upon reboot
SystemReboot
 NAME
system reboot - Reboots system
 SYNOPSIS
system reboot [<seconds>]
 DESCRIPTION
Method used to reboot system
 OPTIONS
seconds
The number of seconds to delay the reboot
 EXAMPLES
reboot
Reboot system immediately
reboot 30
Reboot the system in 30 seconds
Version
 NAME
version - display the system version information
 SYNOPSIS
version
 DESCRIPTION
Display an overview of the command line syntax
 EXAMPLES
Version
Returns the current software version
version
 DESCRIPTION
Display an overview of the command line syntax
 EXAMPLES
Version
Returns the current software version