Wet/Dry Vacuum Operator’s Manual 12 Gallon Model No. VOC1210PF FOR YOUR SAFETY Read and understand this manual before use. Keep this manual for future reference. Distributed By Cleva North America, Inc. 601 Regent Park Court Greenville, SC 29607 Replacement Filters & Accessories available at: Vacmaster.
TABLE OF CONTENTS SECTION PAGE Warranty………………………………………………………………………………….........…………. Safety Instructions & Warnings………………………………………………….........……………...... Double Insulation Instructions....………………………………………………........….……………… Extension Cords………………………………………………………………........……….…………. Unpacking & Checking Carton Contents………….…………………….........……….………....…… General Assembly Instructions……………………………………………….........…………………... Dry Vacuum Operation…………………………………………………….......….………….………….
SAFETY INSTRUCTIONS & WARNINGS IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS VACUUM. Read and understand this operator's manual and all labels on the Wet/Dry Vacuum cleaner before operating. Safety is a combination of common sense, staying alert, and knowing how your vacuum works. Use this Wet/Dry Vac only as described in this manual. To reduce the risk of personal injury or damage to your Wet/Dry Vac, use only Vacmaster ® recommended accessories.
DOUBLE INSULATION INSTRUCTIONS This Wet/Dry Vac is double-insulated, eliminating the need for a separate grounding system. Use only identical replacements parts. Read the instructions for Servicing Double-Insulated Wet/Dry Vacs before servicing. Use this Wet/Dry Vac as described in this manual. Observe the following warnings that appear on the motor housing of your Wet/Dry Vac. DOUBLE INSULATED - GROUNDING NOT REQUIRED - WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT PARTS.
UNPACKING & CHECKING CARTON CONTENTS Remove all contents from the box. Remove the power head and take out any contents inside the collection tank. Check each item against the carton contents list. A Carton Contents List: B C F D H G J K L E I Key A B C D E F G H I J K L Description ..…………....……….….... Qty. Vac Assembly…………………….…….. 1 Hose……………………………………... 1 Utility Nozzle………………………..…... 1 Caster Foot Assembly........................... 4 Extension Wands………………………. 2 Crevice tool...
GENERAL ASSEMBLY INSTRUCTIONS A Philips head screw driver is required. 3 2 4 5 6 1 2 8 10 9 11 WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE TO RAIN. MAKE SURE PLUG IS DISCONNECTED BEFORE ASSEMBLING THE WET/DRY VAC. UNPACKING YOUR WET/DRY VACUUM & GENERAL ASSEMBLY 1. Verify that the power cord is disconnected from the outlet. (fig. 1) 2. Undo the latches. (fig. 2) 3. Lift the power head off the collection tank. (fig. 3) 4.
DRY VACUUM OPERATION 4 3 7 5 6 8 DRY VACUUMING WARNING: BE SURE TO READ, UNDERSTAND, AND APPLY, INFORMATION, ENTITLED ‘SAFETY INSTRUCTIONS & WARNINGS’. DO NOT VACUUM IN AREAS WITH FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO: LIGHTER FLUID, SOLVENT TYPE CLEANERS, OILBASED PAINTS, GASOLINE, ALCOHOL, OR AEROSOL SPRAYS. EXPLOSIVE DUSTS INCLUDE BUT ARE NOT LIMITED TO: COAL, MAGNESIUM, GRAIN, OR GUN POWDER.
LIQUID VACUUM OPERATION 2 4 5 6 LIQUID VACUUMING WARNING: BE SURE TO READ, UNDERSTAND, AND APPLY, INFORMATION, ENTITLED ‘SAFETY INSTRUCTIONS & WARNINGS’. DO NOT VACUUM IN AREAS WITH FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO: LIGHTER FLUID, SOLVENT TYPE CLEANERS, OILBASED PAINTS, GASOLINE, ALCOHOL, OR AEROSOL SPRAYS. EXPLOSIVE DUSTS INCLUDE BUT ARE NOT LIMITED TO: COAL, MAGNESIUM, GRAIN, OR GUN POWDER.
BLOWER OPERATION 2 5 4 2 3 This Wet/Dry Vac has blowing capabilities. To use the blower feature follow the instructions listed. WARNING: ALWAYS WEAR SAFETY GOGGLES COMPLYING WITH ANSI Z87.1 (OR IN CANADA, CSAZ94.3) BEFORE USING BLOWER. WARNING: KEEP BYSTANDERS CLEAR FROM BLOWING DEBRIS. WARNING: WEAR A DUST MASK IF BLOWING CREATES DUST THAT MIGHT BE INHALED. 1. Verify that the power cord is disconnected from the outlet. (fig. 1) 2. Make sure the collection tank is empty before using as a blower. 3.
IMPORTANT! Clean or change the cartridge filter regularly for best performance. ALWAYS USE CARTRIDGE FILTER FOR DRY VACUUMING. If the machine is used without the cartridge filter, the motor will burn out and the warranty will be voided. Always keep spare filters on hand. NOTICE! The filters included are made of high quality materials designed to stop small dust particles. The cartridge filter should be used for dry pick-up only. A dry cartridge filter is necessary to pick up dust.
INSTALLING & CLEANING FOAM WET FILTER 1 2 3 4 5 Installing Foam Wet Filter 1. Verify that the power cord is disconnected from the outlet. (fig.1) 2. Remove power head and place in upside down position. Follow instructions to remove cartridge filter. 3. Carefully slide foam wet filter down over the filter cage making sure the cage is completely covered. (fig. 2 & 3) 4. Place the power head onto the collection tank. Cleaning Foam Wet Filter 1.
EXPLODED VIEW 12
PARTS LIST Part 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Drawing Number 551245001 551005103 551005104 551011106 551002110 551006109 V2H7 V2EW V2FBS V2UN V2CT VCFF 551004104 VFF51 Description Handle Assembly Power Head Assembly Float Cup Filter Cage Collection Tank Vacuum Port Assembly Drain Cap Assembly Caster Foot Assembly Hose Extension Wands Floor Nozzle Utility Nozzle Crevice Tool Cartridge filter Filter Retainer Foam Wet Filter 13 Quantity 1 1 1 1 1 1 1 4 1 2 1 1 1 1 1 1