Manual

16
3) Visually check the barrels to make sure that they
are free from obstructions. See Figure 27.
FIRING YOUR RIFLE
W A R N I N G
Never load a cartridge into the chamber until
you are ready to fire the rifle.
W A R N I N G
Do not disengage the trigger block safety until the rifle is pointed in a safe direction
and you are ready to fire.
W A R N I N G
If a cartridge does not fire and the trigger has been pulled and the trigger block
safety is disengaged...Stop! and do the following: a) Make sure the gun is pointed
in a safe direction b) Engage the trigger block safety c) Wait 60 seconds d)
Follow the instructions above for unloading the rifle.
If during firing the sound of any cartridge is noticeably softer or louder than the
previous cartridge fired... Stop! Do not load another cartridge or fire another
cartridge and do the following: a) Make sure the gun is pointed in a safe direction
b) Engage the trigger block safety c) Follow the instruction above for unloading
the rifle d) With the rifle unloaded visually inspect the rifle for barrel blockage or
damage and inspect the mechanical operation and receiver of the rifle for damage
before continuing.
READ, UNDERSTAND AND FOLLOW ALL WARNINGS AND
INSTRUCTIONS IN THIS MANUAL BEFORE FIRING THE RIFLE.
TO FIRE THE RIFLE:
1) Make sure the rifle is pointed in a safe direction with the trigger block safety
engaged.
2) Make sure you are wearing eye and ear
protection.
3) Keeping your fingers away from the triggers, push
the trigger block safety to the “off” or “fire”
position with the red dot showing. See
Figure 28.
Figure 27
Figure 28