ASSEMBLY INSTRUCTION SAFETY WARNINGS Follow the information on the waning label appearing on the upper bunk end structure and on the carton... Do not remove waning label from bed. Amway use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls. Surface of mattress must be at least 5 inches below the upper edge of guard rails. Do not allow children under 6 years to use the upper bunk. Prohibit more than one person on upper bunk.
Hardware List 1 2 3 210 x40 mm Screws 1/4" x80 Wood dowel PCs PCs Wood Screws PCs 4 5 6 Stop Drawer 21/4" x 25 mm Z1/4" x 15 mm PCs Hex-Head bolts PCs Canopy head though -PCs 21/4" x 80 mm 21/4" x 13 mm Allen Key 1pc Hex-Head bolts PCs Horizontal-Hole bolts PCs no n1 M3.
Following below illustration Assembly Foot board . Using hardware complete Foot board .
STE P 3 . Following below Illustration .Using hardware #5.#8 and dowel #1 connect Sidewall 5 1 £2 C2(2) with Support Sidewall D2) T 7 PCs 6 \ > LAN HARDWARE #5 OUT SIDE