ASSEMBLY INSTRUCTION SKU CODE: (WF286560-WF286561-WF286562) service team stoner si contact our cu This set is included 3 boxes if don't receive full 3 boxes please
SAFETY WARNINGS ! This bed is designed for use only mattresses) meeting the following specifications on the upper bunk, and lower bunk: Bed Type Length Width Thickness Twin Standard 747-75" 38Y* 8" max Replacement parts, including additional guardrails, may be obtained from any of our (CLOUDED TECHNOLOGY(USA) INC) dealers Follow the information on the warnings appearing on the upper bunk bed end structure and on the carton. Do not remove waning label from bed.
Part List Front guard rails PCs 5 — Rear guard rails 2pc Guard rail supports PCs Upper front side rail 1pc 8 Upper back side rail 1pc 13 Lower front side rail 1pc 14 Lower back side rail 1pc 15 Ladder left side rail 1pc 16 Ladder Right side rail 1pc & Step PCs 28 ~~ Slats PCs 05/16
Part List(wr286562) 19 20 21 211 Trundle (left-right) Side Panel Trundle front panel 1pc Trundle back panel 1pc Long wooden bar 1pc apes Short Wooden Bars apes Drawer front Panels PCs Drawer (left-right) 6 Pea Drawer rear PCs 26 27 28 Slats Drawer Bottom Panels PCs Drawer Support Bottom PCs PCs 06/16
STEP 1 Align and fix Upper legs (1&1.1 & 2) and Upper side panels (3) using Hexagonal bolts catch wood (A} and Wood dowel (B), Tighten with Allen Key (P). Align and fix the guard rails (4 & 5) and the Upper side rail (7 & 8) with the right and left side of the headboard, using Hexagonal bolts catch wood (A) Hex-Head bolts{C) Wood dowel (B) and Hole bolts (D) < Tighten with Allen Key (P).
STEP 3 Aligning and fix Guard rail supports (6) with guard rails (4 & 5) and the Upper side rail (7 & 8), Using Hex-Head bolts (E) Canopy head though {F), Tighten with Allen (P) Keys.
STEP 4 Align and fix Below legs (left-right) (8) Below side panels (10) Below panels (11) Bottom bar (12) using Hexagonal bolts catch wood (A) and Wood dowel (B), Tighten with Allen Key (P). STEP 5 Align and fix the Lower front side rail (13 &14) with the right and left side of the headboard, using Hex-Head bolts (C) and Wood dowel (B), Tighten with Allen Key (P).
1, Align and fix ladder side rail ladder stile to ladder step (17) using hexagonal bolts catch wood {H) and Wood dowel (B) tighten with Allen Key (P). 2, Align and fasten the ladder to the upper, lower guard rail, using the Hex-Head bolts with Allen Key (P).
STEP 8 Align and fix Long wooden bar (20) Trundle (left-right) side panel (21821.1) and the Short wooden bars (22) using Hexagonal bolts catch wood (H) Hex-Head bolts (I) and Wood dowel (J), tighten with Allen Key (P). STEP 9 Align and fix Trundle front panel (18) Trundle back panel (19) and cluster link Step 9, using Hex-Head bolts {I) Wood dowel (J) Hex-Head bolts (K) and Horizontal-Hole bolts(D), tighten with Allen Key (P).
STEP 10 Align and fix Drawer front panels (23) Drawer (left-right) (24) Drawer rear (25) Drawer bottom panels (26) and the Drawer Support bottom (27) using Wood Screws (M), tighten with screw driver {not included) 14/16