Operation Manual

To Lock the Harness: Slide belt ends into center lock

housing until it clicks together.

To Unlock the Harness: Depress grey button at center

and pull apart.

PUSHCHAIR OPERATION

OPERATING THE SEAT HARNESS

ADJUSTING THE HARNESS STRAP LENGTH

To Loosen Harness Strap: Pull up on ladder lock

and pull down on webbing

For a Tighter Fit: Pinch webbing and release from back of slip ring

. Pull strap down until snug

To Tighten Harness Strap: Pull down on slip ring.

PUSHCHAIR OPERATION

OPERATING THE SEAT

To Attach Seat: Lower seat onto chassis in forward or reverse position and press down until it clicks into place.

Pull up on seat to ensure it is locked to chassis.

To Remove Seat: Simultaneously push down both

release buttons

and lift seat from chassis

To Recline Seat: Engage button on seat back and tilt

seat to desired position. Release button to lock in

one of ﬁve preset positions.

NOTE: DO NOT use upright position for infants less than six months old. Use the most reclined position

and gradually reposition seat more upright as child is able to support his or her head without assistance.

0187_CRUZEU_Instructions_UK_V1.indd 10-11 9/16/14 9:14 AM