Installation Guide
Thank you for purchasing Derengge .
We would like to take this opportunity to thank you for your business with Derengge. It is our sincere hope that you are
completely satisfied with your experience. We welcome any questions or comments you may have, and will be glad to
assist you in the future.Please read below instructions carefully before installing new faucet.
Two Handle Lavatory Faucet With Push-up Pop-up Drain
Model Number: F-0081CH-CP/F-0081CH-BN/F-0081CH-RV/F-0081CH-MT
F-0081CH-BP/F-0081CH-CS/F-0081CH-JB/F-0081CH-BG
F-0081CH-ORB/F-0081CH-**
Model Number: F-0085CH-CP/F-0085CH-BN/F-0085CH-RV/F-0085CH-MT
F-0085CH-BP/F-0085CH-CS/F-0085CH-JB/F-0085CH-BG
F-0085CH-ORB/F-0085CH-**
1
Care & Maintenance:
* To keep the product clean & shining, follow the steps below:
• 1. Rinse with clean water & dry with a soft cloth.
• 2. Do not clean with soaps, acid, polish, abrasives, or harsh cleaners.
• 3. Do not use cloth with a coarse surface.
• 4. Unscrew the aerator and clean when necessary.
* This installation manual is subject to change without further notice.
* Please read your care and maintenance documentation to determine the limits of proper use.
* This product has been manufactured and tested to the highest quality standards .We offer our customers thoughtfully
crafted fixtures & accessories, engineered for enduring performance over years of use.
9
11
12
13
Hexagon Nut
Hot
Water
Cold
Water
2 3
1
4
5
7
6
8
11
Close
Open
Left
Hot Water
Push
25˚
90˚
12
13
R
R
F-0085CH-XXF-0081CH-XX
Tools you will need:
Adjustable Wrench
Screwdriver
Teflon Tape Silicone Sealant
Bucket
Safety Goggles
Silicone Sealant
Prior to Installation:
• Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure.
Remove existing faucet. Clean sink or countertop to remove any debris, plumber’s putty, or silicone.
• Place bucket under angle stops. Turn on to flush any debris prior to installing new plumbing. Shut off angle stops.
• Pre-drilled hole size requirement: 1-3/8” (min) – 1-1/2” (max)
• Max countertop thickness: 1-3/8”
1/16”(1 mm) min.
1-3/8”(35 mm) max.
1-3/8” (35 mm) min.
1-1/2” (38 mm) max.