Instructions / Assembly

Strap Up for UpCart comes with a set of four interchangeable straps that allow you to strap on
anything you can imagine to your UpCart. Each strap is adjustable in length and can be
tightened. The unique design allows you to quickly adjust the length and secure your load
without having to stretch or strain like traditional bungee cords.
To use the straps:
1) Locate the two (2) straps with metal hooks.
2) Select the strap(s) with length that best meets your need
3) Locate the black plastic clips secured to the straps
4) Connect the clips on the straps with the hooks to the clips on the straps without hooks.
NOTE, each set of clips have a “male” and “female” connector. Ensure you are aligning
the male connector with the female connector.
5) Once the straps have been assembled to the desired length, remove any excess slack by
adjusting the position of the clip. This is done by pulling on the loose end of the strap
hanging out through the clip.
Caution:
• Ensure all clips are secured firmly
• Secure any loose strap material after tightening to prevent it from snagging or becoming a
tripping hazard
• Inspect strap before use