User Guide

Caring for your hearing aids
Open the battery door when not in use.
Always remove your hearing aids when using
hair care products. The hearing aids can
become clogged and cease to function properly.
Do not wear your hearing aids in the bath or
shower or immerse them in water.
If your hearing aids do become wet, do not
attempt to dry them in an oven or microwave.
Do not adjust any controls. Open the battery
doors immediately, and allow your hearing
aids to dry naturally for 24 hours.
Protect your hearing aids from excessive heat
(hair dryer, vehicle glove box or dashboard).
Regular use of a dehumidifier, such as a
Dri-Aid kit, can help prevent corrosion and
prolong the life of your hearing aids.
Do not drop your hearing aids or knock them
against hard surfaces.
2. Hold the magnet near the
“listening end” of your
telephone receiver and
release it. The magnet will
flip to the appropriate side
and seek the optimal position on the
telephone receiver.
3. Place the double-sided tape
in this optimal position on
the telephone receiver and
attach the magnet to the
tape.
If your hearing aids are configured to work
with the wireless uDirect
™
neck worn
accessory, you might benefit from a
Bluetooth
®
hands free option. Refer to the
uDirect user guide for more information.
Your hearing healthcare professional may also
have set up a phone program that you can
access through the push button on your hearing
aids, or through your optional remote control.
24 25
2.
3.
®
Bluetooth is a registered trademark of Bluetooth SIG Inc.