Spec Sheet

Scanners
MSR200
Magnetic
Stripe
Reader
Unitech’s Keyboard Wedge and RS232 readers provide a
simple and reliable magnetic stripe reading solution for a variety
of situations. Our intelligent readers are the right tool for
applications such as point of sale, access control, and self-
service applications. Known for their realiability, they are easy
to install and use.
The MSR200 is avaliable in dual and three track configurations
for reading ISO cards and driver’s licenses.
Readers can be attached to most computer keyboards or to
any flat surface.
When using the keyboard wedge interface, no programming,
software drivers, or external power is required. Just connect
the reader to the keyboard and the keyboard port on almost
any PC and you're ready to read magnetic stripe cards. Data
is read from the card and sent to the PC just as if it were
entered from the keyboard. The MSR200 is low-power CMOS,
so no external power source is required.
Cards can be swiped and read in both directions. A LED
provides feedback to the user indicating ready to read or read
error.
Main Features:
•Low power CMOS design.
•Keyboard emulation.
•Bi-directional read capability.
•Conforms to ISO 7811, ANSI x4.16 &
AAMVA (Driver Licenses) standards.
•Available with IBM PC XT/AT, PS/2 and
RS232 interface.
•Read dual or triple track cards.
•Compact and lightweight enclosure.
•May be mounted on a keyboard or a flat
surface.
•Provides feedback by LED and buzzer.