User's Manual

Coabar

Enable/Disable Codabar

To enable or disable Codabar, scan the appropriate barcode below.

Set Lengths for Codabar

The length of a code refers to the number of characters (i.e., human readable

characters), including check digit(s) the code contains. Set lengths for Codabar to

any length, one or two discrete lengths, or lengths within a specific range.

z One Discrete Length - Select this option to decode only Codabar symbols

containing a selected length. Select the length using the numeric barcodes in

the appendix of Numeric Barcodes. For example, to decode only Codabar

symbols with 14 characters, scan Codabar - One Discrete Length, then scan 1

followed by 4. To correct an error or to change the selection, scan Cancel.

z Two Discrete Lengths - Select this option to decode only Codabar symbols

containing either of two selected lengths. Select lengths using the numeric

barcodes in the appendix of Numeric Barcodes. For example, to decode only

Codabar symbols containing either 2 or 14 characters, select Codabar - Two

Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or to

change the selection, scan Cancel.