Installation Instructions
41
Figure 18
When the temperature is between 4.4C (40°F) and 26.7C (80°F), the OUT temperature is
displayed (Feels Like temperature is the same as OUT temperature).
The concept of apparent temperature (AT) is a linear regression that is not restricted,
and is more appropriate to outside conditions because it includes wind. and was intended as
an assessment of what exposed body surfaces feel like in cold, windy conditions
Regression equations of this universal scale are formulated for indoors, outdoors in shade
but exposed to wind, and outdoors exposed to wind and solar radiation. Of these, outdoors
in shade but exposed to wind, has been chosen as most informative.
15.5PressureThresholdSetting
The pressure threshold (the negative or positive rate of change of pressure signifying a
change in the weather) can be adjusted from 2 mbar/hour to 4 mbar/hour (default level 2
mbar/hour).
The lower the level pressure threshold setting, the higher sensitivity for weather forecast
changes. Locations that experience frequent changes in air pressure require a higher setting
compared to locations where the air pressure is typically stagnant.
16.6RestoreFactoryDefault
To restore the console to factory default (WiFi network ,Weather server and display), press
the MIN/MAX/- key while installing the batteries at the same time. Wait 3 seconds after
installing the batteries to let go of the MIN/MAX /- key.
16.Specifications
16.1 Wireless Specifications
Line of sight wireless transmission (in open air): 100m.
Frequency: 433 MHz
Thermo-hygrometer Transmitter update interval: 60 seconds