ASSEMBLY INSTRUCTIONS
Page 2of 6
/8 #C x 32pcs 5/8 #G x 16pcs Bolt 1/4"X1-9/16"
Align aprons (#2) to the holes of the table legs (#3), then secure by using bolts (#E). Align table bottom to the table top (#1), then secure by using screws (#B). There will be no pre-drilled holes on the table top (#1).
Align connecting bars (#6,7) to the holes of the side frames (#4,5), then secure holes of the connecting bars (#6,7) by using the correct bolts as shown in the picture. #G x 16pcs #G #G #G #G Align seat backs (#8) to the holes of the seat frame, then secure by using bolts (#A).
Rest seat board (#9) to the top of the table, then align seat frame to the holes of the seat board (#9). Secure by using bolts (#C).