Owner`s manual

70
Marked Channel — The scanner only sends the audio for channels that have
the Record option turned on to the REC jack.
Off — The scanner does not send any audio from any channel in the system to
the REC jack, even if the record option is turned on for a channel.
Note: In order for the function to work, you must set the channel to record. You
must also set the system’s record option to either All Channel (which will record
all channels regardless of the channel’s record setting) or Marked Channel
(which only records the channels you’ve set to record).
[MENU]
 Program System F
 Select a trunked system F
 Edit Sys Option F
 Rvw ID:Srch L/O F
The scanner displays each ID you have locked out in ID Search mode and gives
you the option to unlock the ID. To unlock an ID, rotate the scroll to select the
locked out ID, then press [E
YES]. If no ID’s are locked out, the scanner displays
“Nothing Locked / Press Any Key.”
[MENU]
 Program System F
 Select a trunked system F
 Edit Sys Option F
 Clr All L/O IDs F
To quickly unlock all IDs in the system, answer “Y” to “Confirm? Unlock All (Y/N).”
Use this option to enter and edit site information for the current system. See
“Programming Sites” on Page 71 for instructions for each site option. Note that you
must program at least one site for each trunked system in order for your scanner to
scan the system.
Use this option to enter and edit channel groups and channel information. See
“Programming Channel Groups” for instructions for each channel group and
channel option. Note that you must program at least one channel group and one
channel for each conventional system in your scanner. You do not have to enter
Reviewing ID Search Lockouts MEL
Clearing All Locked Out ID’s MEL
Editing Sites MESL
Editing Channel Groups MECL
UB356ZH.fm Page 70 Wednesday, December 19, 2007 11:28 AM