Owner`s manual

To use

F tap the Scroll Control. This action is written in shorthand as F which is

fully explained in the next section. When you tap the control f appears and

remains in the upper left corner of the display for 3 seconds. During this time,

press any button to access the button’s second function. Or, press and hold the

Scroll Control for 2 seconds. The scanner beeps, and the function is “latched” so

that is does not return to normal mode until you tap the Scroll Control again. f

flashes at approximately 1 second intervals.

If you select Function while scanning, the UBC800XLT continues to scan, but

holds on the current system until the function operation is cancelled.

How the Scanner’s Controls Are Represented in This

Manual

To help navigate the scanner’s menus, the steps shown in this manual show the

displays you see and the keys you press or control you operate to get a desired

result. We use a form of shorthand symbols to save space.

The following example shows you how to use the scanner’s menu to edit an

existing system name. It shows you the key to press in brackets [MENU] to select

a menu option and the option you see on the LCD in Boldface Courier type

(Program System) when you press [MENU]. It also instructs you to turn the

Scroll Control (shown as

) to view a series of choices then press or tap the

Scroll Control (the shorthand action shown as

F to enter a choice such as Edit

Name.

[MENU]

 Program System F

 Select the system F

Edit Name  F Then, edit the system name.

Entering Text Within A Menu Option

To enter a letter, turn the Scroll Control () until the letter, numeral or other

character you want appears. To move the cursor to the left, press [4]. To move the

cursor to the right, press [6].

To clear a character, press [.No] twice. To clear all characters, press [.No] three

times.

To accept an entry, press

F or press [EYES].

To cancel an entry, press [MENU].

UB356ZH.fm Page 18 Wednesday, December 19, 2007 11:28 AM