Owner's Manual

12
Using Seven-Digit Dialing
If you can make a local call by dialing only seven digits instead of ten, you
can tell the phone to hide your local area code in the CID list.
Open the menu and select Global Setup , then select Area Code .
Use the number keypad (
0 - 9
) to enter your three-digit area code.
Press
SELECT/MENU
when you’re finished.
The phone uses the programmed code as a filter. When calls come in,
the phone compares the received area code to the programmed one. If
they match, the phone hides the area code in the CID list.
When you're in the CID list, press
#
to show the area code & re-hide it.
If you dial a CID record or save it in the phonebook, the phone dials or
saves the digits exactly as they appear on the display. If you have to
use 10 digits, show the area code before you dial or save the number.
Using the Phonebook
Each handset can store up to 70 entries in its phonebook.
Open or close the phonebook Press
PHONEBOOK/LEFT
.
Scroll through the entries
Press
DOWN
to scroll through the phonebook
from A to Z or
UP
to scroll from Z to A.
Jump to entries that start with
a certain letter
Press the number key corresponding to the
letter you want to jump to.
Dial an entry
Find the entry you want to dial and press
TALK
(or
SPEAKER
).
Phonebook menu options
Open the phonebook with the phone in standby, then press
SELECT/MENU
to open the phonebook menu. Choose one of these options:
Create
New
Add an entry to your phonebook. The handset will prompt you to
enter the name, edit the phone number, and choose a personal ring.
Copy
All
Copy the whole phonebook to another handset. (You must have at
least two handsets to use this feature.)
Delete
All
Erase all the entries in this handset's phonebook. (This does not
affect the entries saved on any other handsets.)
1)
2)
3)


