Owner's Manual

GETTING STARTED [12]
www.uniden.com
2) Press the /vol/ key to select
CIDCW
.
3) Press the select/remote key to toggle and turn on Caller ID on Call
Waiting.
4) Press the end key and return the handset to the base unit to complete the setting. The
handset returns to standby mode.
Entering Your Area Code
If you enter a 3-digit area code number in the
Area Code
option, your local area code does not
appear in Caller ID messages. Do not program this option if your calling area requires 10-digit
dialing. When reviewing Caller ID messages, you will see only the local seven digit number. For
calls received from outside your local area code, you will see a full 10-digit number.
1) When the phone is in standby mode, press and hold the caller id/
menu key. The following screen appears.
2) Press the /vol/ key twice to select
Area Code
.
3) Press the select/remote key. If an area code was already stored,
the phone will display it.
4) Use the number keys (0 - 9) to enter the 3-digit area code. If you
make an error, use the delete/channel key to backspace.
5) Press the select/remote key. A confirmation tone sounds.
GETTING STARTED
EXAI7248.book 12 ページ 2004年1月15日 木曜日 午前11時56分