Owner's Manual
Table Of Contents
- Welcome/Features
- Controls and Functions
- Terms Used in this Manual
- Accessibility
- Installing the Phone
- Register Handsets to the Main Base before Using!
- When to Re-register Handsets
- Basic Setup
- Using Your Phone
- Using the Speed Dial Memory
- Caller ID and CIDCW (Caller ID on Call Waiting)
- The Integrated Answering Device
- Setting Up Your Answering System
- Answering System Setting
- Setting the Time
- Setting a Personal Security Code (PIN)
- Setting the Ring Time
- Selecting the Message Record Time
- Setting the Message Alert Tone
- Selecting the Language
- Setting Your Outgoing Message (Greeting)
- Setting the Main Base Ringer Volume
- Temporarily Mute the Main Base Ringer and Call Screen
- Adjusting the Speaker Volume Level
- Turning the Answering System On/Off
- Using Your Answering System
- Changing the Digital Security Code
- Note on Power Sources
- General Information
- Troubleshooting
- Precautions & Warranty
- I.C. Notice
- Index
- Remote Operation Card
- At Uniden, we'll take care of you!
USING YOUR PHONE[ 22 ] www.uniden.com
Using Call Waiting
If you have Call Waiting, you can receive calls while on the line.
You must subscribe to Call Waiting through your local telephone company.
1) If a call comes in while you are on the phone, you will
hear a call waiting tone. If you have CIDCW activated,
you will see the name and number of the incoming
caller.
2) Press the
talk/flash key to accept the waiting call.
After a short pause, you will hear the new caller.
3) To return to the original caller, press the
talk/flash
key again.