Cordless Telephone Operating Guide ANA 9610

Using Your ANA 9610 Base Unit
Although most of the ANA 9610 operations are performed at the
Handset, there are two operations performed at the Base Unit.
The
status LED (2) blinks whenever the Handset is connected to a
call.
Using the Hold
The hold button (1) is used in conjunction with a desk top phone to
switch from the Handset to a desk top phone.
1. If you need to use a desk top phone which the ANA 9610 is
connected to, press hold on the Base unit then pick up the desk
top phone.
2. To resume using the Handset, press
hold on the Base unit, then
press talk on the Handset. The Handset resumes functioning as
before.
Using the Page/Find
The page/find button (3) is used to locate the Handset. Pressing
page/find will send a ring signal to the Handset.
Note: The Handset Ringer must be on and set to Type A or B in
order for the page/find function to work.
33
1
3
2
P:\ana9610e\9610usae.vp
Mon Aug 30 10:26:56 1999
Color profile: Disabled
Composite Default screen