User's Manual
18
Using the Alarm Clock
Using the Alarm Clock
Your scanner’s Clock displays whenever you turn off the radio functions.
It can also be used as a standard alarm clock.
Setting the Current Time
Follow the steps to set the current time:
1. Move the slide switch to Clock Set.
The hour digits flash.
2. Press ▲ or ▼ to change the hour by one
hour increments or press the number keys
to select the present hour. Then press
E/PGM to set the hour. The minutes digits
flash.
3. Press ▲ or ▼ to change the minute setting by one minute or press the
appropriate number keys to enter the minutes. Press E/PGM to set the
minutes. The seconds resets to 00 when you press E/PGM, then the
AM/PM display icon flashes.
4. Press ▲ or ▼ to move from AM to PM and back. Press E/PGM to
make your selection. To start the clock, move the slide switch to Clock.
Setting the Alarm Clock
Follow these steps to set the alarm time:
1. Move the slide switch to Alarm Set.
The hours digits flash.
2. Press ▲ or ▼ to change the hour by one
hour increments or press the number keys
to select the present hour. Then press
E/PGM to set the hour. The minutes digits
flash.
3. Press ▲ or ▼ to change the minute setting by one minute or press the
appropriate number keys to enter the minutes. Press E/PGM to set the
minutes. The
AM/PM display icon flashes.
4. Press ▲ or ▼ to move from AM to PM and back. Press E/PGM to
make your selection. To start the clock and lock in the alarm time,
move the slide switch to Clock or Clock Set.
UB337ZH(BC340CRS)_new 11/29/05 7:25 PM Page 18