Specifications

Model UT232: OPERATING MANUAL
24
active power, OL will be displayed when it is over
than that.
Press MAX/ , the display shows MAX, it starts
recording the maximum active power value. Press
again to display the current active power value.
Press MIN/ , the display shows MIN, it starts
recording the minimum active power value. Press
again to display the current active power value.
6.
7.
The maximum power is 600kW of single phase, OL
will be displayed when it is over than that. The
maximum range is 1800kW of three phase sum of
5.
When there is no input or single phase, the Meter
displays OL. button is not valid.
It can only sum up the current measurement value.
The maximum and minimum value cannot be
summed up.
Only at this range can carry out sum of watts
measurement, other ranges cannot carry out this
measurement.
When testing has been completed, disconnect the
connection between the testing leads and the circuit
under test and remove testing leads from the input
terminals.
Note