Installation Guide

WPR LED Wrap Residential
INSTALLATION INSTRUCTIONS
Model(s):
WPR-10-UNV-3K
WPR-10-UNV-4K
Risk of Fire or Shock:
Supply conductors and connectors must be rated minimum 60°C. If uncertain, consult an electrician.
CAUTION:
complete installation instructions prior to use.
This luminaire must be installed in accordance with the NEC or your local electrical code. If you are not
The MAXCOR™ WPR - LED Residential Wrap is
designed for surface mount applications using the
included hardware kit.
Un-pack and check for damage.
Remove cover plate of luminaire by removing the
assembly.
Loosen 2 captive screws that hold driver bracket in
place. (Driver will swing out of the way).
Attach mounting bracket to junction box using the
included hardware.
Position luminaire over threaded rod.
When positioned, secure with mounting nut - ensuring
Connect line to black, neutral to white and ground
to green with supplied wire nuts.
Swing driver back into position. Be careful not to
pinch wires.
Re-secure driver to mounting plate with screws.
Re-install cover plate with 2 screws.
1
2
2
3
4
5
5
6
6
7
7
8
9
10
NICOR, Inc.
108 9
3
Black
LED Driver
Line
WhiteNeutral
GreenGround