Instructions / Assembly

Natural Cedar

VERTICAL GARDEN BED

Assembly Manual

GARDEN BED KIT CREATES UP TO 8 SQ.

FT. OF GARDEN SPACE!

24.375”

47.25”

25.875”

15.5”

12”

Vertical Garden Bed

• 5 cubic feet of soil to fill

• Creates 8 square feet of garden area

PAGE 1
Natural Cedar VERTICAL GARDEN BED Assembly Manual GARDEN BED KIT CREATES UP TO 8 SQ. FT. OF GARDEN SPACE! Vertical Garden Bed • • 5 cubic feet of soil to fill Creates 8 square feet of garden area 12” 47.25” 15.5” 24.375” 25.
PAGE 2
Vertical Garden Bed Assembly Manual (2) Angled End Boards (14) Shelf Boards (2) Left Side End Boards with Notches (2) Bottom Trim Boards with 5 Pre-drilled holes (1) Small Bottom Shelf Board (Marked) (1) #2 Square Drive Bit (Included) (34) 2” Screws (2) Top Trim Boards with 4 Predrilled Holes Step 1: Make sure top notches are on the outside and shelf notches angle down into the center as seen in Step 5. Fasten Angled End Board to Left Side End Board with (1) 2” Screw.
PAGE 3
Vertical Garden Bed Assembly Manual Left Side Panel Right Side Panel Step 3: Insert Shelf Boards in the bottom notch as shown. Fasten from each side with 2” screws into pre-drilled holes. Step 4: Assemble marked big bottom shelf board & marked small bottom shelf board. Center the bottom shelf blocks on the big and small bottom shelf boards and fasten with 1 ¼” screws into pre-drilled holes as shown.
PAGE 4
Vertical Garden Bed Assembly Manual Step 5: Place bottom shelf panel in place with blocks facing down as shown. This shelve is free floating.