Installation Guide
To install your 3’ Extension to rst remove the rst
or last pole of a 4‘x12’ PoolfenceDIY fence section.
Remove Pole
3’ Extension
Once the pole is removed, overlap the borders of the 3’ extension
and the 4’x12’ PoolfenceDIY section and reattach the pole using
the modling strip that was removed.
Congratualtions you’ve successfully installed your 3’ extension
If you are having diculty or are missing any componets please call our support line
561-316-6418
Your new 15’ section can be shortend using the custom cut instructions found on page 8 g. 21
in the PoolfenceDIY Install Guide.
4’x12’ PoolfenceDIY section 3’ Extension
Extension Install
PoolfenceDIY spare pole with moulding strip
3’ x 4’ Bordered mesh
Screws
Stainless Steel Hook and Eye
Grey Sleeve
Grey Cap
Parts Included