ASSEMBLY, MAINTENANCE, & USER MANUAL MODEL #SWTC13 WARNING Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. Maximum user weight 200 lbs. Skywalker Holdings LLC P.O.
TABLE OF CONTENTS Part List...........................................................................................................................................................................3 Part Identification...............................................................................................................................................4-5 Exploded Drawing..................................................................................................................................
PART LIST Key No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 # # Qty. Description 6 6 12 6 1 1 1 72 6 6 12 6 6 6 33 1 1 12 1 1 T-joint (may be pre-installed to top tube) Socket (may be pre-installed to top tube) Leg Extension Leg Brace Jump Mat Frame Pad Enclosure Net Springs Straight Tube Curved Tube Foam Pole Cap End Cap M5x44mm Bolt ST4.
PART IDENTIFICATION Before you begin, take a look at the drawings below to make sure you have all the parts! The numbers in the squares to the left (key numbers) will help you identify the parts during assembly.
13 End Cap (x6) 14 M5x44mm Bolt (x6) 15 ST4.
EXPLODED DRAWING (14) (12) (12) (14) (11) (14) (12) (10) (10) (15) (11) (10) (14) (9) (11) (12) (15) (14) (12) (14) (12) (11) (10) (11) (9) (15) (15) (10) (11) (11) (11) (10) (9) (11) (9) (15) (15) (7) (9) (9) (11) (11) (6) (18) (18) (3) (15) (4) (2) (13) (3) (15) (15) (4) (1) (5) (8) (13) (15) (18) (15) (18) (3) (15) (18) (2) (15) (1) (15) (15) (15) (3) (18) (3) (3) (2) (3) (15) (15) (15) (15) (18) (18) (1) (15) (13) (1) (13) (18) (2)
ASSEMBLY READ THIS BEFORE YOU BEGIN • You’ll probably need at least 2 adults and 2 hours to assemble your trampoline (of course, that depends on what model you have, and whether or not you’re secretly a superhero). • We’ve provided a Phillip’s screw driver and two adjustable wrenches to help with assembly, but you’re more than welcome to use your own tools. Many find that using a power drill and a rubber mallet makes things easier. • Use gloves to protect your hands from pinch points during assembly.
ASSEMBLY STEP 3 3 Leg Extension (x12) 4 Leg Brace (x6) 15 Insert a leg brace (4) into 2 leg extensions (3) and tighten with 2 self-tapping screws (15). Insert both leg extensions into the T-joint and socket at the same time, and tighten with two self-tapping screws. Repeat this step until you have 6 frame pieces assembled. Self-tapping Screws (x24) (4) (15) (15) (3) (3) (15) (15) (2) (18) (1) (18) STEP 4 This step is a breeze! (But it is a good idea to grab a friend to help).
STEP 5 If the enclosure net (7) is already attached to the jump mat (5), go to step 7. (We knew you were an overachiever!) If not, no worries, it’s easy to assemble. 5 Jump Mat (x1) Place the jump mat on the ground. The warning label should be on the top, and the ID label should be on the back. Model: STEC12 Part #: 7027 Description: 12 Foot Mat Made in China Skywalker Holdings, LLC PO Box 547, Brigham City, UT, 84302 USA www.skywalkertrampolines.
ASSEMBLY STEP 7 Place the jump mat (5) on clear ground inside the frame. Make sure the 2 warning decals align with 2 T-joints! T-joint Warning label Enclosure door T-joint STEP 8 8 Springs (x1) 16 Spring Tool (x1) Warning label You may want to use gloves for this step! Before you begin, make sure each V-ring has been threaded through the holes on the enclosure net. Make sure the enclosure door is lined up with a T-joint.
STEP 9 Now, repeat step 8 on the other side of the trampoline. Make sure to count the exact number of V-rings and frame holes so each one corresponds! You now have attached 2 V-rings to the frame holes using 2 springs. 8 Springs (x1) Enclosure door STEP 10 8 Springs (x4) Next, find the middle of the 2 springs by counting the exact number of V-rings and frame holes. Place a spring into the V-ring just left of the T-joint, and stretch the spring until it reaches the frame hole just left of the T-joint.
ASSEMBLY STEP 11 8 Next, place 6 springs into the V-rings just left of the sockets, and stretch the springs until they reach the frame holes just left of the sockets. You now have attached 12 V-rings to the frame holes using 12 springs. There should be 5 V-rings and 5 frame holes in between each spring. Springs (x6) Enclosure door (8) Socket STEP 12 Now, place one spring directly to the left of each spring already placed.
STEP 13 Place the frame pad (6) on top of the springs. Adjust the frame pad so that the slits are directly above the T-sockets. 6 Frame Pad (x1) Important: Don’t use the trampoline without the frame pad. It’s designed to protect your little jumpers! Trust us on this one. Socket (6) Slit of Pad STEP 14 Look under the trampoline. Find the straps that are attached to the underside of the frame pad (6). Position the outer straps so that one strap is on each side of the frame.
ASSEMBLY STEP 15 9 Straight Tube (x6) 10 Curved Tube (x6) 11 If you want, take a snack break because you’re MORE THAN HALFWAY DONE, and you deserve it. This next step is easy. Just slide all the straight tubes (9) and curved tubes (10) into foam (11).
STEP 17 Important: The pole cap (12) has two sides; one with a hexagon hole, and one with a regular hole. 12 Pole Cap (x6) Insert the pole cap into one strap ring found on the top of the enclosure net. Make sure the hexagon hole is facing the net, and the regular hole is facing you. Hexagon hole Strap Hole Regular hole Regular hole (12) (7) STEP 18 14 M5x44mm Bolt (x6) Next insert a curved tube (10) into the pole cap (12).
ASSEMBLY STEP 19 Starting from the enclosure door, lift one of the assembled poles and insert the straight tube (9) into the socket. Repeat this process to assemble the 5 remaining poles. Helpful tip: When inserting the enclosure poles, pull back on the middle of the poles! Pull back Socket Socket STEP 20 Insert the end caps (13) into the bottom of the sockets.
STEP 21 LAST STEP YOU’RE IN THE FINAL HOME STRETCH. Using the included plastic tie, attach the safety placard to the trampoline frame close to the enclosure door. Frame Safety Placard STEP 22 Congratulations on completing your new trampoline! (See... we knew you could do it!) So here comes the real question... are you satisfied with this completed product? If you are, go ahead and write a review on the retailer’s site you bought it from. We’d really appreciate it...
MAINTENANCE & CARE INFORMATION Congratulations and high five on successfully assembling your new Skywalker Trampolines 12' Round Trampoline with Enclosure! Now, the best way to keep your new trampoline in tip top shape, is to periodically check for: • • • • • • • Missing, improperly positioned, or insecurely attached frame padding, netting, enclosure tubes, or foam sleeves Punctures, frays, tears, or holes worn in the mat, frame padding, netting or foam sleeves Deterioration in the stitching or fabric of t
INSTRUCTIONS FOR USE To reduce the risk of serious injury, read and follow all of the warnings, precautions, and instructions in this manual before you use the trampoline enclosure. Warnings and instructions for care, maintenance, and use of this trampoline and enclosure are included to promote safe enjoyable use of this equipment. 1. 2. 3. It is the responsibility of the owner and supervisors of the trampoline and enclosure to make sure all users obey the safety instructions given in this manual.
WARNING LABEL PLACEMENT WARNING Do not land on head or neck. Do not attempt or allow somersaults. Landing on your head or neck can cause serious injury, paralysis, or death, even when landing in the middle of the mat. Use trampoline only with mature, knowledgeable supervision. WARNING Only one person at a time on the trampoline. Do not allow more than one person on the trampoline. Use by more than one person at the same time increases the chance of injury.
METHODS OF ACCIDENT PREVENTION THE SUPERVISOR’S ROLE IN PREVENTING ACCIDENTS It is the responsibility of the supervisors of trampoline users to provide knowledgeable and mature supervision. They need to know and enforce all of the rules and warnings printed in this manual to minimize the likelihood of accidents and injuries. They also need to inform users of these rules.
INSTRUCTIONS & MODEL LESSONS The following lessons are examples of an instructional program. They should follow a complete discussion and demonstration of body mechanics between the supervision and the student(s). 1. 2. 3. 4. Mounting and dismounting: Demonstration and practice of proper techniques. Fundamental bounce: Demonstration and practice. Breaking: Demonstration and practice. Breaking on command. Hand and knee drop: Demonstration and practice, stressing four-point landing and alignment.
Lesson 5: Seat Drop Lesson 6: Front Drop 1. Land in a sitting position with your legs parallel to the mat. 2. Place your hands on the mat beside your hips. 3. Push with your hands to return to an erect position. 1. Start from a low bounce and land on the mat in a prone position. 2. Keep your head up and your arms extended forward on the mat. 3. Push with your arms to return to an erect position. Lesson 7: Half Turntable Lesson 8: Swivel Hips 1.
TRAMPOLINE SAFETY INFORMATION In trampoline use, as in all active recreational sports, participants can be injured. However, there are steps that can be taken to reduce risk of injury. In this section, primary accident patterns are identified and the responsibilities of supervisors and jumpers in accident prevention are described.
ENCLOSURE SAFETY INFORMATION NEED FOR TRAMPOLINE ENCLOSURE SAFETY A trampoline enclosure is a recreational product. The information on this page identifies important safety precautions. The precautions are not all-inclusive, because an enclosure can be used in ways that this manual cannot cover completely. To prevent pinches and cuts during enclosure use, a frame pad must be installed on the trampoline (see the trampoline manufacturer’s instructions).
LIMITED WARRANTY Skywalker Holdings, LLC warrants its products to be free from defects in material and workmanship under normal use and service conditions. The steel frame is warranted for three (3) years after the date of purchase. All other parts are warranted for one (1) year after the date of purchase. Warranty coverage extends only to the original retail purchaser from the date of original purchase. This warranty is only valid concerning products used for residential use.
NOTE: SKYWALKER HOLDINGS, LLC IS NOT RESPONSIBLE OR LIABLE FOR INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE PRODUCT OR OTHER DAMAGES WITH RESPECT TO ANY ECONOMIC LOSS, LOSS OF PROPERTY, LOSS OF REVENUE OR PROFITS, LOSS OF ENJOYMENT OR USE, COST OF REMOVAL, INSTALLATION OR OTHER CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES.
NOTA: SKYWALKER HOLDINGS, LLC NO ES RESPONSABLE DE LOS DAÑOS INDIRECTOS, ESPECIALES O CONSECUENTES QUE SURJAN DE O EN RELACIÓN CON EL USO O DESEMPEÑO DEL PRODUCTO O DE OTROS DAÑOS RELATIVOS A CUALQUIER PÉRDIDA ECONÓMICA, PÉRDIDA DE PROPIEDAD, PÉRDIDA DE INGRESOS O GANANCIAS, PÉRDIDA DEL DISFRUTE O DEL USO, COSTO DE EXTRACCIÓN, INSTALACIÓN U OTROS DAÑOS CONSECUENTES. ALGUNOS ESTADOS NO PERMITEN LA EXCLUSIÓN O LIMITACIÓN DE LOS DAÑOS INCIDENTALES O CONSECUENTES.
GARANTÍA LIMITADA Skywalker Holdings, LLC garantiza que sus productos no tendrán materiales ni mano de obra defectuosos en condiciones de uso y servicio normales. El armazón de acero tiene una garantía de tres (3) años a partir de la fecha de compra. Las demás piezas tienen una garantía de un (1) año a partir de la fecha de compra. La cobertura de la garantía se extiende solo al comprador minorista original a partir de la fecha de compra.
INFORMACIÓN SOBRE EL CERRAMIENTO NECESIDADES DE SEGURIDAD PARA EL CERRAMIENTO DEL TRAMPOLÍN El cerramiento de un trampolín es un producto de recreación. La información de esta página identifica las precauciones de seguridad importantes. Las precauciones no incluyen todas las posibilidades, dado que un cerramiento puede utilizarse de maneras que este manual podría no cubrir en su totalidad.
INFORMACIÓN SOBRE EL TRAMPOLÍN Con el uso del trampolín, como en todos los deportes recreativos activos, los participantes pueden lesionarse. Sin embargo, pueden tomarse medidas para reducir el riesgo de lesión. En esta sección, se identifican los principales patrones de accidentes y se detallan las responsabilidades de los supervisores y de los usuarios relativas a la prevención de accidentes.
1. Comience con una caída de sentado. 3. Gire la cabeza hacia la izquierda o la derecha y balancee los brazos hacia arriba en la misma dirección. 4. Gire las caderas en la misma dirección que la cabeza y los brazos, de manera que complete un giro. 5. Aterrice en posición sentada. 4. Mantenga la espalda paralela a la lona y la cabeza erguida. 5. Después de completar la media vuelta, aterrice de frente. 1.
INSTRUCCIONES Y LECCIONES MODELO Las siguientes lecciones son ejemplos de un programa instructivo. Deberían seguir un debate y una demostración completos de la mecánica del cuerpo entre la/s persona/s que supervisa/n y el/los estudiante/s. 1. 2. 3. 4. Montaje y desmontaje: Demostración y práctica de técnicas correctas. Principios básicos del rebote: Demostración y práctica. Frenado: Demostración y práctica. Frenar tras recibir la indicación.
MÉTODOS PARA EVITAR ACCIDENTES LA FUNCIÓN DEL SUPERVISOR EN LA PREVENCIÓN DE ACCIDENTES Los supervisores de los usuarios del trampolín tienen la responsabilidad de proporcionar supervisión informada y madura. Deben conocer y hacer cumplir todas las reglas y advertencias impresas en este manual para minimizar la probabilidad de accidentes y lesiones. También deben informarles estas reglas a los usuarios.
POSICIÓN DE LA ETIQUETA DE ADVERTENCIA ADVERTENCIA No aterrice con la cabeza ni el cuello. No intente realizar ni permita que otros realicen volteretas. Si aterriza con la cabeza o el cuello, podría lesionarse gravemente, quedar paralizado o morir, incluso si lo hace en el medio de la lona. Use el trampolín únicamente bajo la supervisión de personas maduras e informadas. Solo una persona por vez en el trampolín. No deje que más de una persona suba al trampolín.
INSTRUCCIONES DE USO Para reducir el riesgo de lesiones graves, lea y respete todas las advertencias, precauciones e instrucciones de este manual antes de usar el cerramiento del trampolín. Se incluyen advertencias e instrucciones de cuidado, mantenimiento y uso de este trampolín y cerramiento para promover el uso seguro y agradable de este equipo. No coloque nada en la barrera del cerramiento, a menos que sea un accesorio aprobado por el fabricante o una pieza del sistema de cerramiento. 16.
INFORMACIÓN DE MANTENIMIENTO Y CUIDADO ¡Felicitaciones!, ¡choque los cinco! Ha montado exitosamente su nuevo trampolín circular de 12” con cerramiento de Skywalker Trampolines.
PASO 21 ÚLTIMO PASO: ¡LLEGÓ A LA RECTA FINAL! Usando el amarre de plástico incluido, coloque el letrero de seguridad en el armazón del trampolín, cerca de la puerta del cerramiento. Armazón Letrero de seguridad PASO 22 ¡Felicidades! Terminó de armar su nuevo trampolín. (¿Vio?... ¡Sabíamos que podía lograrlo!) Es momento de responder la pregunta más importante... ¿está conforme con este producto armado? Si la respuesta es “sí”, escriba una reseña en el sitio web del vendedor al que se lo compró.
MONTAJE PASO 19 Comience con la puerta del cerramiento, levante uno de los postes montados e inserte el tubo recto (9) en el manguito. Repita este proceso para montar los 5 postes restantes. Consejo útil: Cuando inserte los postes del cerramiento, tire de la parte central de los postes hacia atrás. Tire hacia atrás Manguito Manguito PASO 20 Introduzca las tapas de los extremos (13) en la parte inferior de los manguitos.
12 PASO 17 Importante: La tapa del poste (12) tiene dos lados; uno con un agujero hexagonal y otro con un agujero normal. Tapa del poste (x6) Inserte la tapa del poste en un anillo con correa en la parte superior de la red. Asegúrese de que el agujero hexagonal se encuentre orientado hacia la redy de que el agujero normal se encuentre orientado hacia usted.
MONTAJE PASO 15 9 Tubo recto (x6) 10 Tubo curvo (x6) 11 Gomaespuma (x12) Si lo desea, tómese un descanso porque YA REALIZÓ MÁS DE LA MITAD DEL TRABAJO, y se lo merece. El siguiente paso es sencillo. Deslice todos los tubos rectos (9) y curvos (10) dentro de las gomaespumas (11). Si encuentra dificultades a la hora de deslizar los tubos en las gomaespumas, intente echar un poco de agua dentro de las gomaespumas.
6 PASO 13 Coloque la almohadilla del armazón (6) sobre los resortes. Ajuste la almohadilla del armazón para que las ranuras queden justo sobre los manguitos en T. Importante: No utilice el trampolín sin la almohadilla del armazón. ¡Está diseñado para proteger a los pequeños saltarines! Confíe en nuestro consejo. Almohadilla del armazón (x1) Manguito (6) Ranura de la almohadilla PASO 14 Mire debajo del trampolín. Ubique las correas que se colocaron en la parte inferior de la almohadilla del armazón (6).
MONTAJE PASO 11 8 Resortes (x6) A continuación, coloque seis resortes en el anillo en V, a la izquierda de los manguitos, y estire los resortes hasta que alcancen los agujeros del armazón, a la izquierda de los manguitos. Ya ha unido doce anillos en V con los agujeros del armazón utilizando doce resortes. Debe haber cinco anillos en V y cinco agujeros del armazón entre cada uno de los resortes.
PASO 9 Ahora, repita el paso 8 del otro lado del trampolín. Asegúrese de contar la cantidad exacta de anillos en V y agujeros del armazón para que se correspondan entre sí. Ya ha unido dos anillos en V con los agujeros del armazón utilizando dos resortes. 8 Resortes (x1) Puerta del cerramiento PASO 10 8 Resortes (x4) Luego, busque la parte central de los dos resortes contando la cantidad exacta de anillos en V y los agujeros del armazón.
MONTAJE PASO 7 Apoye la lona de salto (5) en el suelo dentro del armazón. Asegúrese de que las dos etiquetas de advertencia estén alineadas con las dos articulaciones en T Articulación en T Etiqueta de advertencia Puerta del cerramiento Articulación en T PASO 8 8 Resortes (x1) 16 Herramienta para el resorte (x1) Etiqueta de advertencia Se recomienda que use guantes para este paso. Antes de comenzar, asegúrese de que cada anillo en V pase a través de los ojales de la red del cerramiento.
7 5 PASO 5 Si la red del cerramiento (7) ya está montada en la lona de salto (5), proceda al paso 7. (¡Sabíamos que usted era un estudiante destacado!) Si aún no lo está, no se preocupe, es fácil de montar. Lona de salto (x1) Coloque la lona de salto en el suelo. La etiqueta de advertencia debería estar en la parte superior, y la etiqueta de identificación, en la parte posterior.
MONTAJE PASO 3 3 Extensión de la pata (x12) 4 Refuerzo de la pata (x6) 15 Tornillos autorroscantes (x24) Coloque un refuerzo de la pata (4) en dos extensiones de la pata (3) y ajústelo con dos tornillos autorroscantes (15). Coloque ambas extensiones de la pata en la articulación en T y el manguito al mismo tiempo, y ajústelas con dos tornillos autorroscantes. Repita este paso hasta que tenga 6 piezas del armazón montadas.
MONTAJE LEA LO SIGUIENTE ANTES DE COMENZAR • Es probable que se necesiten, al menos, dos adultos y 2 horas para montar su trampolín (esto dependerá del modelo que tenga y de si usted es o no un superhéroe encubierto). • Hemos incluido un destornillador Phillips y dos llaves ajustables para que utilice durante el montaje, pero también puede utilizar sus propias herramientas. Muchas personas consideran que utilizar un taladro eléctrico y un mazo de goma simplifica la tarea.
DIBUJO DE DESPIECE (14) (12) (12) (14) (11) (14) (12) (10) (15) (11) (10) (10) (14) (9) (11) (12) (15) (14) (12) (14) (12) (11) (10) (11) (9) (15) (15) (10) (11) (11) (11) (10) (9) (9) (15) (15) (11) (9) (7) (9) (11) (11) (6) (18) (2) (18) (18) (15) (13) (1) (1) (18) (2) (15) (15) (18) (18) (13) (15) (1) (15) (5) (8) (3) (15) (15) (4) (1) (15) (15) (18) (3) (15) (13) (15) (15) (18) (18) (3) (3) (15) (2) (3) (13) (15) (3) (18) (2) (15) (
Herramienta para el resorte (x1) 16 Tapa del extremo (x6) 13 14 17 (x6) Destornillador (x1) Tubo superior (x12) 18 Tornillo autorroscante (x33) 15 5
IDENTIFICACIÓN DE PIEZAS Antes de comenzar, observe los dibujos de abajo para asegurarse de que posee todas las piezas. Los números que se encuentran en los recuadros ubicados a la izquierda (números de referencia) lo ayudarán a identificar las piezas durante el montaje.
LISTA DE PIEZAS N.º de ref. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 # # Cant.
ÍNDICE Lista de las piezas........................................................................................................................................................................................3 Identificación de piezas...........................................................................................................................................................................4-5 Dibujo de despiece...................................................................................
MONTAJE, MANTENIMIENTO Y MANUAL PARA EL USUARIO MODELO N.º SWTC13 ADVERTENCIA Lea todas las precauciones e instrucciones de este manual antes de utilizar este producto. Guarde este manual para consultarlo en el futuro. Peso máximo del usuario: 200 lb Skywalker Holdings LLC P.O.