Instructions / Assembly

SafeTop™ Landscape Edging
Instructions
1. Take the included GatorStakes and bend them in half.
2. Take SafeTop Edging and lay it out in your preferred location, form
as needed, use tin snips or sheers to cut to desired length if necessary
3.Take one 4’ SafeTop Edging Strip and two Edging Stakes, you will
need to make a starter strip with them, now drive one stake onto the
front of your provided edging strip, and one in the middle
*** NOTE: USE PROVIDED DRIVER FOR HARD OR ROCKY SOIL BY PLACING IT ON TOP
OF THE PROVIDED STAKE AND USING A HAMMER / MALLET TO DRIVE IT IN TO THE SOIL
***
4. Take a second SafeTop Edging strip and connect the tabs together
*** NOTE: THERE WILL BE SOME PLAY IN THE CONNECTION THIS IS TO ALLOW FOR
UNEVEN SURFACES ***
5. Take another GatorStake and drive it in directly over the tabs
locking the tabs together.
6. Continue connecting the SafeTop Landscape Edging strips and using
the provided GatorStakes until you are finished with your project