SP5736 USER MANUAL Please carefully check the unit and make sure there is no damage when you open the carton. QUESTIONS, PROBLEMS, OR MISSING PARTS? Please Contact Customer Service Before Returning to Store www.soupro.com servicespi@sourceproinc.
General Information Table of Contents • GENERAL INFORMATION FCC/ICSES Information 2 Safety Instructions 2 Warranty 4 • ASSEMBLY INSTRUCTIONS Preparation 5 Assembly 7 • FIREPLACE OPERATIONS Operating Instructions 13 Care And Maintenance 14 Troubleshooting 15 FCC / ICES Information This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the FCC rules.
General Information • To prevent a possible fire, DO NOT block any air intakes or exhaust in any manner. DO NOT use on soft surfaces, like a bed, where opening may become blocked. • ALWAYS plug this unit directly into a wall outlet/receptacle. NEVER use with an extension cord or relocatable power tap (outlet/power strip). • This heater includes an automatic protection system that will shut off the unit to prevent overheating.
General Information Warranty 1-YEAR LIMITED WARRANTY Soupro Limited Inc. (hereinafter referred to collectively as “the Company”) warrants that your new KOMODO Electric Fireplace is free from manufacturing and materials defects for a period of one (1) year from date of purchase. Subject to the following conditions and limitations: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
Preparation IMPORTANT INFORMATION ASSEMBLY INSTRUCTIONS 1. Before you begin, locate the instructions and hardware. Be sure you have all of the parts and can identify them. 2. To avoid scratching the finish, assemble the product on a soft, non-abrasive surface such as carpet or cardboard. 3. Assembly of this product may require more than one person. 4.
Preparation Parts List D ASSEMBLY INSTRUCTIONS A C A Front Cover x1 D Mounting Bracket x1 B Base x1 E Remote Control x1 C Fireplace x1 F Acrylic Shards x1 Hardware Identification Number of spare hardware is indicated in ( ).
Assembly - Wall Mount Installation Remove mounting bracket (D) from back of fireplace (C) by unscrew two screws at the top of the unit. 1. ASSEMBLY INSTRUCTIONS D Remove the base (B) of fireplace (C) by unscrewing three screws at the rear base of the unit. 2.
Assembly - Wall Mount Installation 3. Choose a wall location to attach the mounting bracket (D). Position the mounting bracket (D) in the desired location. Use a level to align the bracket and mark the eight holes with a pencil. ASSEMBLY INSTRUCTIONS D Minimun height: 16in 4. Select the hardware appropriate for mounting bracket installation. STUD WALL • Secure the mounting bracket (D) to wall using screws (AA) at marked stud locations.
Assembly - Wall Mount Installation 5. Hang the fireplace (C) on the hooks at bottom of mounting bracket (D) and push the fireplace (C) into mounting bracket (D). ASSEMBLY INSTRUCTIONS D C C C 6. D Re-fasten the two screws as shown.
Assembly - Wall Mount Installation 7. Distribute the Acrylic Shards (F) evenly in the tray of the fireplace (C). ASSEMBLY INSTRUCTIONS F 8. 10 Re-install the front glass (A) to the fireplace (C).
Assembly - Free Standing Installation 1. Distribute the Acrylic Shards (F) evenly in the tray of the fireplace (C).
Assembly - Free Standing Installation 2. ASSEMBLY INSTRUCTIONS 12 Re-install the front glass (A) to the fireplace (C).
Operating Instructions AM PM Power Button • Press the POWER button to turn ON or OFF the unit. • When the unit is in ON mode, touch control panel light will fully light up for 8 sec and then shut down if without any others operation including remote control. • When the unit is in OFF mode, the POWER symbol LED will Semi-bright. When power OFF, unit will be stopped, if heater is working before power OFF the unit, fan will have 20 seconds delay to ensure heat will not be trapped inside the unit.
up Button ; Down Button • Control the setting of flame brightness, flame color, mood light brightness, mood light color, timer, clock and temperture . Care And Maintenance Child Lock Activate Child Lock • When the unit is ON, hold the POWER button for 10 seconds to activate the Child Lock function. "E3" will be displayed and a "beep" will sound 3 times to indicate the Child Lock function is activated. Then, all function keys are locked.
Care And Maintenance DISPOSAL OF USED BATTERY: A battery may contain hazardous substances that could be endangering to the environment and human health. • This symbol marked on the battery and/or packaging indicates that used battery shall not be treated as municipal waste. Instead it shall be left at the appropriate collection point for recycling. • By ensuring the used battery is disposed of correctly, you will help prevent potential negative consequences for the environment and human health.
QUESTIONS, PROBLEMS, OR MISSING PARTS? Please Contact Customer Service Before Returning to Store www.soupro.com Ver.1 servicespi@sourceproinc.com +1-844-455-4621 Crafted in China Distributed by Soupro Limited Inc.
SP5736 MANUEL D'UTILISATEUR Vérifiez soigneusement l'appareil et assurez-vous qu'il n'y a pas de dommages lorsque vous ouvrez le carton. QUESTIONS, PROBLÈMES OU PIÈCES MANQUANTES? Contactez le service clientèle avant de le retourner au magasin www.soupro.com servicespi@sourceproinc.
Informations générales Table des matières • GENERAL INFORMATION Informations FCC / IC 2 Information de securite 2 Garantie 4 • INSTRUCTIONS D’ASSEMBLÉE Préparation 5 Assemblée 7 • OPÉRATIONS DE FOYER Instructions d’operation 13 Soins et entretien 14 Guide de depannage 15 Informations FCC / IC Cet article a été testé et déclaré conforme aux limites imposées aux dispositifs numériques de classe B, conformément à l’alinéa 15 du règlement de la FCC.
Informations générales • Afin de prevenir les risques d’incendie, ne bloquez JAMAIS les ouvertures de ventilation ou de sortie d’air de quelque facon que ce soit. Ne placez PAS l’appareil sur une surface molle, comme un lit, car l’ouverture pourrait se bloquer. • Ne placez PAS l’appareil directement sous une prise de courant. Branchez TOUJOURS l’article directement sur une prise murale. N’utilisez JAMAIS une rallonge ni une prise rechargeable (barre d’alimentation).
Informations générales GARANTIE 1 AN GARANTIE LIMITEE Soupro Limited Inc. (ci-apres refere comme la (compagnie) garantie que votre nouveau foyer electrique KOMODO est libre de tous defauts de fabrication pour une periode de un an de la date d’achat. Sujet aux conditions et limitations suivantes. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Le foyer electrique doit etre installe et utilise en accord avec le manuel d’installation et d’utilisation fournis avec l’appareil.
Préparation UNE INFORMATION IMPORTANT INSTRUCTIONS DE MONTAGE 1. Avant de commencer, localisez les instructions et le matériel. Assurez-vous d'avoir toutes les pièces et peut les identifier. 2. Pour éviter de gratter la finition, assemblez le produit sur une surface douce et non abrasive comme le tapis ou le carton. 3. L'assemblage de ce produit peut exiger plus d'une personne. 4.
Préparation Liste des pieces D INSTRUCTIONS DE MONTAGE A C A Couvercle avant x1 D Support de Montage x1 B Base x1 E Télécommande x1 C Foyer x1 F Pierres x1 Identification de la quincaillerie Nombre de materiel en () est separe pour la sauvegarde AA x 8 + (1) 6 E B F BB x 8
Assemblée - Installation Murale Retirez le support de montage (D) à l'arrière du foyer (C) en dévissant les deux vis en haut de l'unité. 1. INSTRUCTIONS DE MONTAGE D Retirez la base (B) du foyer (C) en dévissant les 3 vis à la base arrière de l'appareil. 2.
Assemblée - Installation Murale 3. Choisissez un emplacement sur le mur pour fixer le support de montage (D). Positionner le support de montage (D) à l'endroit désiré. Utilisez un niveau pour aligner le support et marquer les huit trous avec un crayon. INSTRUCTIONS DE MONTAGE D Distance minimale entre les objets: 16 pouces 4. Sélectionnez le matériel approprié pour le montage du support.
Assemblée - Installation Murale 5. Accrocher le foyer (C) sur les crochets en bas du support de montage (D) et pousser le foyer (C) dans le support de montage (D). INSTRUCTIONS DE MONTAGE D C C C 6. D Resserrez les deux vis retirées à l'étape 1.
Assemblée - Installation Murale 7. Distribuer les pierres (F) uniformément dans le plateau du foyer (C). INSTRUCTIONS DE MONTAGE F 8. 10 Réinstaller la vitre avant (A) du foyer (C).
Assembly - Free Standing Installation 1. Distribuer les pierres (F) uniformément dans le plateau du foyer (C).
Assembly - Free Standing Installation 2. INSTRUCTIONS DE MONTAGE 12 Re-install the front glass (A) to the fireplace (C).
Operating Instructions AM PM Bouton d’Alimentation • Appuyer sur le bouton d'alimentation pour mettre l’appareil sous tension ou hors de l'appareil. • Lorsque l'appareil est en mode MARCHE, touchez le du panneau de commande va allumer la lumière pour 8 secondes et s’éteindra si aucune autre opération n’est fait incluant ceux sur la télécommande. • Lorsque l'appareil est en mode ARRET, le voyant d'alimentation DEL sera semi-brillant. Lorsque l'alimentation est a ARRET, l'unite s’arretera.
Bouton HAUT ; Bouton BAS • Contrôler le réglage de la luminosité de la flamme, la couleur de flamme, la luminosité de la lumière d'ambiance, la couleur de la lumière d’ambiance, la minuterie, l'horloge et la température. SOINS ET ENTRETIEN Verrouillage Sécuritaire Activé le Verrouillage de Sécurité • Quand l’unité fonctionne, tenir le bouton POWER 10 secondes pour active la fonction de verrouillage. E3 s’affichera indiquera que la fonction verrouillage est active. Toutes les fonctions sont verrouillées.
SOINS ET ENTRETIEN Elimination de la pile usagee : Une pile contient des substances dangereuses qui peuvent etre nocives pour l’environnement ou votre sante. • Ce symbole appose sur une pile ou sur son emballage indique que la pile ne doit pas etre eliminee de la meme maniere que les dechets menagers. Elle doit etre apportee a un point de collecte approprie pour etre recyclee.
QUESTIONS, PROBLÈMES OU PIÈCES MANQUANTES? Contactez le service clientèle avant de le retourner au magasin www.soupro.com Ver.1 servicespi@sourceproinc.com +1-844-455-4621 Fabriqué en Chine Distribué par Soupro Limited Inc.