Use and Care Manual

ManualsBrandsUnbranded ManualsOutdoor Power Equipment3500 PSI 3 GPM Triplex Plunger Pump

First Choice When Quality Matters

NORTH

AMERICA

Plunger Pumps

Operating Instructions and Parts Manual RSV Series Pumps

LIMITED WARRANTY

Annovi Reverberi (A.R.) Cam Shaft Plunger Pumps are warranted for a

period of ﬁ ve years and Axial Radial Pumps are warranted for a period

of one year to the original purchaser. Electric Pressure Washers are

warranted for a period of one year to the original purchaser. This is from

the date shipped from factory or U.S. Warehouse. AR, ArrowLine and

GF accessories are warranted for a period of 90 days.

Warranty covers manufacturing defects or workmanship that may

develop under normal use and service in a manner up to the directions

and usage recommended by the manufacturer.

Warranty does not apply to misuse or when pump or accessory is altered

or used in excess of recommended speeds, pressures, temperatures or

handling ﬂ uids not suitable for pump or accessory material construction.

Warranty does not apply to normal wear, freight damage, freezing

damage or damage caused by parts or accessories not supplied by AR

North America, Inc.

Liability of manufacturer for warranty is limited to repair or replacement

at the option of the manufacturer when such products are found to be of

original defect or workmanship at the time it was shipped from factory.

This warranty is in lieu of all other warranties, expressed or implied,

including any warranty of merchantability and of any and all other

obligations or liabilities on the part of the manufacturers or equipment.

WARRANTY RETURNS

Items returned for warranty consideration must have a Returned Mer-

chandise Authorization (RMA) number. All unauthorized returns will

be refused and shipped back to sender. Please fax requests to: 763-398-

2009 or e-mail to shop@arnorthamerica.com.

Torque Speciﬁ cations in/lbs:(ft/lbs)

Oil Manifold Piston Rear Side Valve Connecting

Capacity (Head) Nut Cover Cover Cap Rods

12 92/(5) N/A 71/(6) N/A 442/(37) N/A

Plunger Pumps

Operating Instructions and Parts Manual RSV Series Pumps

First Choice When Quality Matters

NORTH

AMERICA

Form RSV-OM 0607

High Performance Pumps

Description

Plunger Pumps are designed for a wide variety of high

pressure washing applications. They are constructed

with die-cast bodies and feature a brass head. Internal

components include coated ceramic plungers for long life

and durability. Precision cast cooling ﬁ ns are anodized for

maximum heat dissipation. Oversized needle bearings on the

drive side, and ball on the non-drive side together with the

precision supports assure positive alignment and centering

in relation to the crankcase. Valve cages of special designed

Ultra-Form provide positive seating and extended life. One-

piece connecting rods are special alloy aluminum, bronze

rods over 4,000 psi units, oversized for strength and load

disbursement. These pumps are designed for gasoline driven

systems.

Please read and save these instructions. Read carefully before attempting to assemble, install,

operate or maintain the product described. Protect yourself and others by observing all safety

information. Failure to comply with instructions could result in personal injury and/or property

damage! Retain instructions for future reference.

Operating Instructions and Parts Manual RSV Series Pumps

RSV 3400 rpm D Version - 3/4”

Model Max GPM Max PSI

RSV2.5G25D-F25 2.5 2500

RSV3G25D-F25 3 2500

RSV 3400 rpm D Version - 1”

Model Max GPM Max PSI

RSV3G35D-F40 3 3500

RSV3.5G35D-F40 3.5 3500

RSV4G40D-F40 4 3000

RSV4G40D-F40 4 4000

Figure 1

Hollow Shaft

Figure 2

Hollow Shaft

Summary of content (8 pages)

PAGE 1
92/(5) Manifold (Head) 71/(6) N/A LIMITED WARRANTY N/A Side Cover 442/(37) Valve Cap N/A Connecting Rods RSV Series Pumps First Choice When Quality Matters NORTH AMERICA Items returned for warranty consideration must have a Returned Merchandise Authorization (RMA) number. All unauthorized returns will be refused and shipped back to sender. Please fax requests to: 763-3982009 or e-mail to shop@arnorthamerica.com.
PAGE 2
36 2 ª ª .
PAGE 3
Notes Plunger Pumps Operating Instructions and Parts Manual NORTH AMERICA First Choice When Quality Matters RSV Series Pumps PSI √4000 Always wear safety glasses or goggles and appropriate clothing. Do not operate in or around an explosive environment. The pump is designed to pump nonflammable or non-explosive fluids. These pumps are intended to pump clean filtered water only.
PAGE 4
Failure to follow these warnings may result in personal injury or damage to property. Never spray or clean the unit with water Never pull the unit by the power cord. Only use power cords that are in good condition. Do not handle the pump/motor with wet hands. The motor must be grounded. Use GFCI plugs and receivers. Your power supply must conform to the system requirements.
PAGE 5
12 20 23 21 16 17 18 19 22 24 26 46 44(3) 25 33 5 4 6 7 8 9 10 11 12 13 14 15 4 3 2 1 64 28 36 38 39 40 41 45 47 44 68 43 49 67 50 58 59 51(3) 53 69 52 67 58 55 59 64 37(3) 38(3) 40(3) 3 4(2) 5 1 2 6 7 8 9 10 70 TYPE F25 66 First Choice When Quality Matters NORTH AMERICA Unloader Kit 2280 11 12 13 14 15 TYPE F40 42(3) 66 Water Seals Kit 2189 41(3) 71 64 "D" VERSION Ø 3/4” 56 RSV Series Pumps "D" VERSION Ø 1” 51 54 Support Ring Kit 2191 36(3)
PAGE 6
If the seal assembliess are in the head use the channel lock pliers to grab the seal retainer on the outside ring, twist the retainer in eitherr Figure 13 direction (this is done to free the retainer O-ring which is stuck to the manifold) and lift out. (See Figure 13) With your finger pull out the white restop ring. (See Figure 14) With your finger pull the Figure 14 4. 5. 6. Figure 12 Remove the seal retainer O-ring with the mechanics pick.
PAGE 7
Low pressure Pressure gauge fluctuates Worn nozzle Belt slippage 2 Packing worn 1 2 Worn packing or valves 3 Valves worn or blocked by foreign bodies Incorrect or worn nozzle 2 1 Unloader valve is by-passing 1 Clogged suction strainer 2 Low pressure at nozzle Air leak in suction hose or inlet 1 Running pump dry 5 Pump looses prime, chattering noise, pressure fluctuates Excessive pressure and/or temperature of fluid being pumped 4 Air is trapped inside pump Material in the fluid be
PAGE 8
Remove the chemical injector discharge nipple. Use the needle nose pliers to lift out the check valve. (See Figure 29) Inspect the o-rings on the injection nipple, if damaged 2. replace. Place small amount of thread locker on the thread and tighten. (See Figure 31) Figure 31 2. 1. Figure 34 First Choice When Quality Matters NORTH AMERICA Place a small amount of thread locker on the unloader cartride threads and screw into the Figure 35 base and tighten.