Instructions / Assembly

Tool Storage Rack
MODEL # RHSTGRK
Thank you for purchasing the Right Hand™ Tool Storage Rack. This User Guide is intended to provide you with guidelines to ensure
that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described
in this User Guide may void the limited warranty.
Please read all directions before using the product and retain this guide for reference. This product is intended for household use only.
This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions. See warranty for details.
INSTALLATION INSTRUCTIONS
NOTE: The two racks included may be used together or separately.
1. Locate studs in the wall if applicable, e.g., if installing on drywall.
2. Using a level, mark a horizontal line on the wall. The line you make will
indicate the position of the bottom of the rack.
3. Position the rack with the bottom against the line so
that the top is facing up, as shown (A).
4. Move the rack so that the mounting holes are lined up
with the wall studs, if applicable, and then mark the
location for the screws with a pencil (B).
Top
Level Line
Bottom
24 in.
(60.96 cm)
16 in.
(40.64 cm)
12 in.
(30.48 cm)
12 in.
(30.48 cm)
Top
Bottom
A
B