Use and Care Manual

Long Leg Caps

Pro Base Assembly

Telescoping Tube Assembly

The JumpSport PlyoFit Pro Adapter is now ready for use!

Pro Leg Assembly

Installation Steps:

1. Turn the trampoline upside down.

2. Install angled foot caps over two adjacent leg caps. If you have a folding trampoline, ensure one of the hinges is be-

tween the legs.

3. Remove the remaining leg caps and slide the long foot caps over the legs.

4. Set telescoping tube assembly to lowest setting. The PlyoFit Pro is non-adjustable.

5. Insert the tube and leg assemblies onto the long foot caps as shown above.

6. Remove the “L” sockets and base feet from the cross tube of the PlyoFit base.

7. Slide the two Center Support rails onto the Cross Tube, ensuring the “L” of the Center Support Connectors is facing

inward.

8. Reassemble the PlyoFit base. If you have a 44 inch trampoline, you must install the longer Center Supports onto the

Center Support Connectors and add the 44 inch Plyofit Extender to the Base Assembly.

9. Slide the Pro base assemblies through the open center support connectors and connect the two halves with the snap

button.

10. Slide the completed base assembly onto the legs. Make sure all pieces are snug.

Installation Instructions for PlyoFit™ Pro

Adapter

PAGE 1
Installation Instructions for PlyoFit™ Pro Adapter Telescoping Tube Assembly Long Leg Caps Pro Leg Assembly Pro Base Assembly Installation Steps: 1. Turn the trampoline upside down. 2. Install angled foot caps over two adjacent leg caps. If you have a folding trampoline, ensure one of the hinges is between the legs. 3. Remove the remaining leg caps and slide the long foot caps over the legs. 4. Set telescoping tube assembly to lowest setting. The PlyoFit Pro is non-adjustable. 5.
PAGE 2
44 inch PlyoFit Extender Center Support Pro Base Assembly– Female Connector Center Support 44 inch Pro Extender Pro Base Assembly– Male Half In order to promote safe, effective use of this product, it is the responsibility of the purchaser and of anyone who uses this product to read all instructions and to become familiar with all of the information in this booklet, to convey the warnings to all users, and to enforce JumpSport’s rules for safe use.
PAGE 3
Limited Warranty What is covered by this warranty? This warranty covers any defects in materials or workmanship on all of the components of the JumpSport PlyoFit Adapter, and is extended exclusively to the original retail purchaser. How long does this coverage last? Warranty coverage for each component begins from the original date of purchase and lasts for 1 year (for private home use) or 90 days (for commercial or public use).