Instructions / Assembly

Boxch produces a full line of gauges with
many dierent styles.
1-1/2" — “Mini” Black Bezel
1-1/2" — "Mini" Chrome Bezel
2" — Black and Chrome Bezels
(See page 2 for hole sizes.)
Gauges allow you to monitor the condition
of your vehicle and to tell how well it is per
-
forming. If there are any problems, you can
detect them immediately before they become
severe. Warning lights only tell you when the
problem already requires immediate atten
-
tion. You will nd that the addition of these
gauges will add to your peace of mind and
driving comfort.
MICROPROCESSOR-CONTROLLED ENGINES
operation. If your vehicle is one of these
you CANNOT replace the sender(s) with any
other. You can add an additional oil pressure
sender with a “Tee Adapter Kit” but the only
possible way to install a non OEM water
temperature sender is to install the new
sender in a dierent location, retaining the
OEM unit in its original location. Check with
the vehicle’s manufacturer or dealer to see
if this is possible.
Many newer vehicles employ microproces-
sors that control most of the engine and
electrical functions. Microprocessors are
very sensitive electrical components. Before
installing any aftermarket equipment consult
the vehicle’s manufacturer or shop manual
to make certain that no damage will result.
Some of these newer vehicles use electric
cooling fans or microprocessor engine
controls that depend on readings from the
original equipment sending units for correct
not be lengthened)?
 
and negatively grounded?
3. It is recommended that the battery
ground cable be disconnected before any
electrical work is performed, especially
when installing Ammeters or Voltmeters.
4. Route all wiring and gauge tubing away
from linkages, high heat or moving parts.
1. Read the entire instructions for your
gauge before proceeding.
2. Be sure the gauge is suitable for your
vehicle:
 -
cle’s operating range?
 
reach from the engine connection point
to the gauge (temperature gauges can-
INSTALLATION & SAFETY PRECAUTIONS
GENERAL MOUNTING INSTRUCTIONS
AMMETER GAUGE
VOLTMETER GAUGE
TEMPERATURE GAUGE
PRESSURE GAUGE
VACUUM/ECONOMETER/
BOOST GAUGE
FUEL LEVEL GAUGE
1
INSTALLATION
INSTRUCTIONS
©2013 Bosch Automotive Service Solutions

FULL ONE (1) YEAR WARRANTY

that this unit will be free from defects in materials and workmanship for a period of one (1) year from
the date of original purchase.
Any unit that fails within this period will be repaired or replaced at Bosch's option and without charge
when returned to the factory. Bosch requests that a copy of the original, dated sales receipt be returned
with the unit to determine if the warranty period is still in eect.
This warranty does not apply to damages caused by accident, alterations, or improper or unreasonable use.
Expendable items, such as batteries, fuses, lamp bulbs, ash tubes are also excluded from this warranty.
      -

allow the disclaimer of liability for incidental or consequential damages, so the above disclaimer may
or may not apply to you. This warranty gives specic legal rights, and you may also have rights which
vary from state to state.


